Some PICS of my Toyota Harrier AIRS
#47
Pics, where are the pics!!!!
#51
Sweet very sweet!
Converted to AFS HID?
Converted to AFS HID?
#52
Rookie
Thread Starter
Join Date: Jun 2006
Location: 00
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
#53
What brand bulbs did you use for your fogs and what color? Also you mentioned you replaced your DRL/ High beam bulb with a LED bulb, does your DRL come on as a white light (I thought the DRL was at half the voltage as the high beam). And what brand LED did you use or part number? Thanks!
#54
Rookie
Thread Starter
Join Date: Jun 2006
Location: 00
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
What brand bulbs did you use for your fogs and what color? Also you mentioned you replaced your DRL/ High beam bulb with a LED bulb, does your DRL come on as a white light (I thought the DRL was at half the voltage as the high beam). And what brand LED did you use or part number? Thanks!
For the DRL LED I bought from http://www.v-leds.com.
The color it gives off is a kind of white-blue color. I would say like a 6500k look.
Yes the DRL is no way as bright as the high beam. It just looks cool and for car shows
#55
Richard, please do me a big favor, take a picture of your side repeaters close up, I just need to know the exact location, I will install a set and will do a DIY. Thanks in advance.
#57
Thanks a bunch, there's quite a few people interested in doing this mod. Just a stern warning, this is not for the faint of heart, you will be cutting sheet metal. Some people already squirm, when they hear CUTTING. This is one mod, you can not undo very easily without spending a ton.
But it is well worth it. It is primarily a safety mod. Signal Side Repeaters are nowadays replaced with side mirror repeaters.
Also gives you a JDM look.
But it is well worth it. It is primarily a safety mod. Signal Side Repeaters are nowadays replaced with side mirror repeaters.
Also gives you a JDM look.
#58
#59
Richard, thanks, but I already did my side repeaters, took me 4 hours, nice mod! I printed pics of the Harrier and estimated the location, turned out well.
#60
Rookie
Thread Starter
Join Date: Jun 2006
Location: 00
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Needed an Update so I shall be posting some pics of my new wheels soon.
They are D'Vinci Duros with Black Inserts.
20x9 on Nitto 255/40/20
Rear needed a small spacer and even with that size tire everything fits flush
within the fender.
They are D'Vinci Duros with Black Inserts.
20x9 on Nitto 255/40/20
Rear needed a small spacer and even with that size tire everything fits flush
within the fender.