ashcaivtt

Nice motor infin

I think it looks nice at the standard or lowered height.

Wot size are your alloys and tires.

Cheers

infinirx

They are 21's. I would have to look around for the specs if you really want it.

iKon_RX

wow it's been about 1 1/2 years and no one has figured out the brand of the japan made coilover system for the rx330/350s

infinirx

That's about the jist of it iKon_RX. I knew they are out there. I see them in my Harrier Magazine. But can't read Japanese nor can I speak it or I would call Japan and ask!

mowmow

Luxury Mod sells coilovers for the RX

You can check out their website and see how they make their springs.
http://www.zoom-bane.jp/

The last year I inquire they are about $450 but with the yen being so strong now, it can easily go up to the $500s which is still pretty reasonable.

infinirx

I have never seen any Coilovers that cheap under $900 or so and worth a dam. I wonder if they will answer an email Oh and the coils on there site are for the newer RX350 and 400 Great find! Thanks for posting.

mowmow

Update, I just got a message from Luxury Mods, because of the high yen to US$ exchange rate the cost went up to near $700

infinirx

Nice! and it's for a RX330? Cause there have been changed to the Tranny with the 350 so I dunno about the suspension. Is this a sports coil or can it be softened?

mowmow

I don't know all the details and don't want to give you wrong information either. So the best thing is to PM LuxuryMods for details on the coilovers. I vaguely remember seeing the poster before and it's fully adjustable with a 2-3" drop

infinirx

Reasonable I will email them. thanks!

infinirx

By the way Magen has agreed to make me custom Coilovers. I am providing stock struts and I will let you guys know about the details later when this becomes final

Carver

So, you are coming off the air? Any reason other than the lack of drop?

infinirx

No sir I am just taking out the UA bags. I am going Coil/Cup Better ride and lower

Carver

LOL, that set up is going to take about a 55 page tutorial.

infinirx

^^^ lol well a shop is doing the install. It's pretty simple since I already have the air system installed. It's just another version of an air set up just ALLOT more stable and comfortable and LOW...



PS: This is the most expensive route to go where air suspension is concerned. The cups alone usually cost about $2k plus and good coils another $2K ++