RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Roof Rack removal procedure

Thread Tools
 
Search this Thread
 
Old 03-15-13 | 11:20 AM
  #136  
mandyfig's Avatar
mandyfig
Moderator
 
Joined: Apr 2007
Posts: 12,301
Likes: 417
From: GA
Default

I actually have an almost brand new set of cross bars. Lexus replaced then under TSB and shortly after I went the nekkid roof route...
Old 03-21-13 | 06:28 PM
  #137  
1koolfella's Avatar
1koolfella
Pole Position
iTrader: (1)
 
Joined: Jul 2011
Posts: 313
Likes: 3
From: nyc
Default

I recently had both crossbars replaced. One the day before the warranty ran out and while replacing the damage one their technician damaged the other one and that was replaced on good will credit. I really just want to remove the cross bars but not take the roof rack off. I wonder if the cross bars work with the 3rd gen Rx350.

When ever it snows it's a pain to remove the snow from the roof with the crossbars.
Old 03-23-13 | 06:28 AM
  #138  
Kendig's Avatar
Kendig
Thread Starter
Driver
 
Joined: May 2009
Posts: 110
Likes: 3
From: fl
Default

To just remove the crossbars properly, you need to remove the rear plastic covers on the side rails, and remove one screw that prevents the racks from being slid off the rear.

This thread has several photos and comments on the procedure to remove the covers, and one of the posts includes a picture of the screw.

Read it all, follow the procedure and use a little patience with the rear covers.
Old 04-21-13 | 11:16 AM
  #139  
1koolfella's Avatar
1koolfella
Pole Position
iTrader: (1)
 
Joined: Jul 2011
Posts: 313
Likes: 3
From: nyc
Default

I finally took the crossbars off but decided to leave the roof rack on. Much easier to clean, but discovered that my roof has a tan line.
Old 04-22-13 | 04:37 AM
  #140  
dragosdor's Avatar
dragosdor
Rookie
iTrader: (1)
 
Joined: Oct 2012
Posts: 58
Likes: 0
From: Texas
Default

Originally Posted by Sandhopper
Repaced the Sewell kit with the Moon Roof one piece molding... Looks great. The one thing I found out the hard way [with the Sewell filler kit] was that there is nothing holding the center pieces in place other then some friction. Lost my driver side center molding in the car wash. At least now the one piece molding is clipped front and rear. Got an extra sewell kit now if anyone is interested...
Would you consider selling your Sewell kit? I would like to buy it. Please send me an email at info@storyteller.pro Thanks!
Old 04-22-13 | 05:51 AM
  #141  
mandyfig's Avatar
mandyfig
Moderator
 
Joined: Apr 2007
Posts: 12,301
Likes: 417
From: GA
Default

Originally Posted by 1koolfella
I recently had both crossbars replaced. One the day before the warranty ran out and while replacing the damage one their technician damaged the other one and that was replaced on good will credit. I really just want to remove the cross bars but not take the roof rack off. I wonder if the cross bars work with the 3rd gen Rx350.

When ever it snows it's a pain to remove the snow from the roof with the crossbars.
3rd Gen means 2010? No it will not. Will fit a 2009 RX350 though.
Old 12-08-13 | 04:39 PM
  #142  
Rayne's Avatar
Rayne
Driver School Candidate
 
Joined: Nov 2013
Posts: 44
Likes: 0
From: Texas
Default

This is a great idea I def want to do this to my 2004! Cause the paint is chipping on the rack and I'll never use it.
Old 12-08-13 | 04:45 PM
  #143  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 28
From: FL
Default

Originally Posted by Rayne
This is a great idea I def want to do this to my 2004! Cause the paint is chipping on the rack and I'll never use it.
Sewell has the kit you need.

http://lexus.sewellparts.com/accesso...2004/2422.html
Old 03-02-14 | 11:20 AM
  #144  
drewcam888's Avatar
drewcam888
Driver
iTrader: (1)
 
Joined: Nov 2011
Posts: 112
Likes: 1
From: nv
Default

The rubber seal that runs in the channel between the two roof racks mounts disappeared. I guess it wasn't glued in well enough to only be held by the roof rack removal plate. Does anyone know where I can find the part number for this item. I can't seem to find it on Sewell's site.
Old 03-02-14 | 12:01 PM
  #145  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 28
From: FL
Default

Originally Posted by drewcam888
The rubber seal that runs in the channel between the two roof racks mounts disappeared. I guess it wasn't glued in well enough to only be held by the roof rack removal plate. Does anyone know where I can find the part number for this item. I can't seem to find it on Sewell's site.
Believe you are looking for 75555D and 75556C

http://lexus.sewellparts.com/oem-cat...400h-2008.html
Old 03-05-14 | 03:49 PM
  #146  
JJCEJC's Avatar
JJCEJC
Driver School Candidate
 
Joined: Sep 2013
Posts: 9
Likes: 0
From: North Carolina
Default

KENDIG,

Thanks for the great photo's. As a result of them I have ordered the kit and can't wait to get them off. Aside from how good it looks it will be so much easier to wash, wash and remove the snow. Honestly I would never put anything on the roof, rack or not.

JJCEJC
Old 07-23-14 | 05:10 PM
  #147  
jonnyp's Avatar
jonnyp
Driver School Candidate
 
Joined: Aug 2012
Posts: 5
Likes: 0
From: SKCAN
Default

Everyone here is getting rid of their Roof Rails . . .

Me - I've got the Panoramic - and I want to put some roof rails on. Anyone want to sell them!? ha!
Old 07-23-14 | 07:34 PM
  #148  
JProdun's Avatar
JProdun
Driver
 
Joined: Apr 2012
Posts: 131
Likes: 0
From: NY
Default

Sure! You can have mine.

I'm in NY though and don't think shipping is an option...

What year is yours. Never heard of ours ahving panoramic roofs.
Old 08-10-14 | 10:44 PM
  #149  
jonnyp's Avatar
jonnyp
Driver School Candidate
 
Joined: Aug 2012
Posts: 5
Likes: 0
From: SKCAN
Default

2004 I believe. Yeah - it's rare - The Lexus deaership here / mechanics had never seen one.

I've got lots of water leaking problems with it rains a bunch. Not sure if it's the panoramic roofs fauls ot not. But will come down the left column - and also even in the back.

ANYWAY - roof rack. Of course i want one now and I looked at salvage - found one out in Eastern Canada - Good thing I checked under my gutter covers - No mounting holes at all there! if I want one - looks like I'll have to figure out a clamp on one that will work. Unless I want to put the work in and do a custom setup and make my own holes.

Thanks for the offer! You're right - Sipping would probably kill it - More sor in inconvienence of getting you to pack her up.
Old 08-10-14 | 11:28 PM
  #150  
jakenbake's Avatar
jakenbake
Lead Lap
 
Joined: Aug 2013
Posts: 517
Likes: 13
From: Arizona
Default

That is sad about your panoramic roof. I wished I had one. I had one on my X3 and i loved it. It never leaked but i did have to take it to BMW a couple times because it would get jammed.

I did the roof rack removal when I bought my RX and gave mine away. Now I want them back. If anyone has some extras I will take them. :-)


Quick Reply: Roof Rack removal procedure



All times are GMT -7. The time now is 06:09 PM.