Door Sill Light Out
01-25-10, 07:12 AM
#2
Driver
Join Date: Apr 2009
Location: WI
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
01-25-10, 10:20 PM
#3
That bulb is under the door sill is sealed right in. I've heard someone on the forum had changed it out to white led before but no one has clear instructions on how to remove the bulb from the door seal.
01-26-10, 07:41 AM
#5
I removed the lighted door sills while installing XM in '07 RX350 - very simple process. See pages 6-7 here
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
01-27-10, 08:49 AM
#6
I removed the lighted door sills while installing XM in '07 RX350 - very simple process. See pages 6-7 here
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
Trending Topics
01-31-10, 04:26 PM
#8
Now that's an option!
07-19-10, 01:25 PM
#9
I removed the lighted door sills while installing XM in '07 RX350 - very simple process. See pages 6-7 here
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
I don't recall specifically but I think the bulbs were just run of the mill low wattage bulbs you should be able to find in any auto parts store.
Good luck
07-20-10, 11:14 AM
#11
...the original post from JANUARY referencing the link to the installation instructions to the RX Satellite Radio wasn't updated along the lines of the most recent posts from yesterday and today.
Here's the correct link to the satellite radio instructions
Or, you can use my instructions for removing the sill plate:
Step 1: Lift up
Step 2: See step 1
That's all there is to it. The sill is held in place by a few pop-in clips. Just pop up the sill and unplug it.
D
Here's the correct link to the satellite radio instructions
Or, you can use my instructions for removing the sill plate:
Step 1: Lift up
Step 2: See step 1
That's all there is to it. The sill is held in place by a few pop-in clips. Just pop up the sill and unplug it.
D
02-17-11, 06:53 PM
#15
Driver School Candidate
Join Date: Jan 2011
Location: wa
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
