anyone installed dual exhaust on RX350
11-21-10 | 09:22 AM
#2
Pole Position
Joined: Oct 2010
Posts: 219
Likes: 1
From: CO
a custom exhaust system can be installed on virtually any vehicle... i don't know if there are application specific kits for the rx, but a reputable muffler shop in your area can due custom mandrel bends and dump it almost anywhere on the vehicle
11-21-10 | 04:33 PM
#3
Lead Lap
Joined: May 2009
Posts: 549
Likes: 4
From: ontario
Hello,
I have a custom dual exhaust system on a 2005 rx330. It was costly but I'm getting 100km or 60 miles more per tank of gas. So I believe the upfront cost of $2000 will pay for itself over time. I have a post on here that I currently cannot locate with pictures of the exhaust from underneath the vehicle.
I hope this helps,
Chris
I have a custom dual exhaust system on a 2005 rx330. It was costly but I'm getting 100km or 60 miles more per tank of gas. So I believe the upfront cost of $2000 will pay for itself over time. I have a post on here that I currently cannot locate with pictures of the exhaust from underneath the vehicle.
I hope this helps,
Chris
11-22-10 | 07:18 AM
#5
Lead Lap
Joined: May 2009
Posts: 549
Likes: 4
From: ontario
Hi,
Yes the exhaust system was done at a custom shop in Toronto- Hot Rod Scott's. They removed everything from the in front of the Cat to the back and replaced everything with stainless steel parts. Two Flowmaster mufflers, 2 Flowmster resonators and high-flow Flowmaster cats as the stock cat could not keep up with the increased air flow. I also added the Weapon-R intake system as well. If someone could assist me in locating my thread with my photos that would be great as I cannot find the thread.
Chris
Yes the exhaust system was done at a custom shop in Toronto- Hot Rod Scott's. They removed everything from the in front of the Cat to the back and replaced everything with stainless steel parts. Two Flowmaster mufflers, 2 Flowmster resonators and high-flow Flowmaster cats as the stock cat could not keep up with the increased air flow. I also added the Weapon-R intake system as well. If someone could assist me in locating my thread with my photos that would be great as I cannot find the thread.
Chris
11-22-10 | 05:38 PM
#6
Pole Position
Joined: Oct 2010
Posts: 219
Likes: 1
From: CO
Hi,
Yes the exhaust system was done at a custom shop in Toronto- Hot Rod Scott's. They removed everything from the in front of the Cat to the back and replaced everything with stainless steel parts. Two Flowmaster mufflers, 2 Flowmster resonators and high-flow Flowmaster cats as the stock cat could not keep up with the increased air flow. I also added the Weapon-R intake system as well. If someone could assist me in locating my thread with my photos that would be great as I cannot find the thread.
Chris
Yes the exhaust system was done at a custom shop in Toronto- Hot Rod Scott's. They removed everything from the in front of the Cat to the back and replaced everything with stainless steel parts. Two Flowmaster mufflers, 2 Flowmster resonators and high-flow Flowmaster cats as the stock cat could not keep up with the increased air flow. I also added the Weapon-R intake system as well. If someone could assist me in locating my thread with my photos that would be great as I cannot find the thread.
Chris
post some pics
11-22-10 | 06:52 PM
#7
Instructor
Joined: Apr 2007
Posts: 1,130
Likes: 4
From: ca
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
