Driver side cupholder
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: NY
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Driver side cupholder
As I find myself enjoying my RX more and more, I discovered a cupholder that ejects from the driver side of my dashboard. To my dismay, my cupholder has no support and you can see the the drink holder portion is cracked.
Anyone had this problem? Easy to repair? Part #?
I did a search but yielded nothing in the way of an answer.
Anyone had this problem? Easy to repair? Part #?
I did a search but yielded nothing in the way of an answer.
#3
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: NY
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
I will probably never use it, i just dont like that its broken. I found one on an auction site for around 70 dollars. Just dont know how much the dash has to come apart to repair it myself.
#6
Registered User
Drivers Drink holder
Ive replaced two of them on my car. Both under warranty.
The local car wash broke the vent control tab off both times. If you go down, left or right the tab goes flush. But if you go up. It stops. And with just a little pressure. The tab will come apart in two pieces.
The warranty bill to replace the whole assembly is 213.00 dollars.
Never had any problems with the drink holder part. Thats the one I always use. As the center one has a cup for coins. And my iPhone holder in it.
The local car wash broke the vent control tab off both times. If you go down, left or right the tab goes flush. But if you go up. It stops. And with just a little pressure. The tab will come apart in two pieces.
The warranty bill to replace the whole assembly is 213.00 dollars.
Never had any problems with the drink holder part. Thats the one I always use. As the center one has a cup for coins. And my iPhone holder in it.
Trending Topics
#9
Driver School Candidate
Join Date: Apr 2009
Location: GA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Broke mine off a while back by hitting it with my knee while getting out of the car. Broke both of the vertical pieces.
What I did was took a thin piece of metal (like a small paperclip) to bridge the pieces then epoxy the sides to the metal. Keep the metal thin and use small amount of black epoxy and you can't really tell any fix was done.
Works fine as alI that ever goes in it is a can of soda.
What I did was took a thin piece of metal (like a small paperclip) to bridge the pieces then epoxy the sides to the metal. Keep the metal thin and use small amount of black epoxy and you can't really tell any fix was done.
Works fine as alI that ever goes in it is a can of soda.
#13
Pole Position
iTrader: (1)
I saw this on Ebay.
Probably not the right color.
http://www.ebay.com/itm/LEXUS-RX330-...ht_3365wt_1062
Probably not the right color.
http://www.ebay.com/itm/LEXUS-RX330-...ht_3365wt_1062
Last edited by 1koolfella; 03-11-12 at 07:45 PM. Reason: Since this is for the Harrier, it maybe for the right side and not the left.
#14
I saw this on Ebay.
Probably not the right color.
http://www.ebay.com/itm/LEXUS-RX330-...ht_3365wt_1062
Probably not the right color.
http://www.ebay.com/itm/LEXUS-RX330-...ht_3365wt_1062