hi, finally got around to installing the unit that i bought of a member here and ran into some issues and was wondering if someone could help me out.

install was very easy but when programing for cd-mp3 emulation i did not get the "BEEPS". i tried other settings and didn't get the beeps either.

second problem: when the unit is connected my volume sets to 0 and i am unable to adjust it. this is in any mode not just cd-mp3.

and third: i havent gotten the system to work but when i connected my ipod nano it gave me a "ipod error".

the person i bought it from said to check the nav. volume because thats where the beeps come from so i'll try that when i can but what can i do about the main volume?

thanks

 

Have you tried looking for the answers on the Vais Web Page Forums?

http://www.vaistech.com/forums/index.php

 

damn thanks, didn't even notice they had a forum. thanks

 

i had the same problem happen today with my VML for my 2006 rx400h. no beeps, and now no volume. and i searched forum and i didn;t see anything.

did you solve your problem?

 

no man, can't post in the Vais forum yet. still waiting for ok from a mod. if you figure something out please post. i cant get to the car right now but like i was told, try to adjust the nav. vol. on the touch screen and see if you get the beeps. as for the main vol. IDK.

 

Send us an email to info@vaistech.com for immediate support or call our tech line. Thanks!

 

i solved my problem. the lack of volume is directly related to battery power on my hybrid. since the engine doesn't actually start until needed everything runs battery power. as i worked installing unit i obviously ran battery down enough for things to still work but the volume control was first to go.

i only figured this our because i went to drive car this morning and nav system went out. i freaked and called vais tech and thought they caused problem. nope, my apologies. just old battery.

i got a jump start and everything worked immediately, full volume on stereo. went to buy new battery. and next to reinstall VML.

 

glad to hear you got that figured out. i wonder if thats the same problem i was having. what made me lean towards the Vais unit was that when i disc. the Y harness the problem would go away. when i put it back on, the problem came back. i even disc. the vais unit and only left the Y harness and was still having this problem. maybe i'll call vais and see what they say.