RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Bosch Icon Wipers

Thread Tools
 
Search this Thread
 
Old 02-10-14 | 02:45 PM
  #1  
kickin8's Avatar
kickin8
Thread Starter
2IS/2RX/4RX
iTrader: (1)
 
Joined: Feb 2007
Posts: 6,851
Likes: 27
From: SF Bay Area
Default Bosch Icon Wipers

Picked up a pair couple weeks ago from Autozone when they had the $20 instant rebate

No rain here in CA until last week...so I decided to install them in the RX

VERY impressed with the performance....no streaks!

I still love the OEM wipers....just to lazy to replace the blade insert

Highly recommended if you are lazy like me!
Old 02-10-14 | 02:57 PM
  #2  
mandyfig's Avatar
mandyfig
Moderator
 
Joined: Apr 2007
Posts: 12,301
Likes: 417
From: GA
Default

I love Icons. I have them on all my Lexi. I agree that OEM fillers are very good, but takes some getting used to on how to replace without getting injured. I think the Icons outlive the OEM fillers. They both have good quality rubber which we all know come from Asia. And they look sweet, too.

I usually get them discounted and sometimes with rebates. Then they become very competitive. They are steep. The OEM’s are now coming out with Hybrid wipers, one piece looking wipers but have the traditional fillers. One thing for sure the quality of the rubber blades have gone up through the years, I am talking about the quality wiper blades.
Old 02-10-14 | 03:12 PM
  #3  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 30
From: FL
Default

Originally Posted by mandyfig
I agree that OEM fillers are very good, but takes some getting used to on how to replace without getting injured.
I bought an extra set of blades from Sewell along with a few sets of inserts. Pop off the old ones, pop on the new ones. Later, I can take my time replacing the inserts on the set I pulled off and I am ready to go for the next exchange.
Old 02-10-14 | 03:28 PM
  #4  
mandyfig's Avatar
mandyfig
Moderator
 
Joined: Apr 2007
Posts: 12,301
Likes: 417
From: GA
Default

Why did I not think of this strategy! Makes good sense. It took me a while replacing the inserts on my IS!
Old 02-10-14 | 04:26 PM
  #5  
kickin8's Avatar
kickin8
Thread Starter
2IS/2RX/4RX
iTrader: (1)
 
Joined: Feb 2007
Posts: 6,851
Likes: 27
From: SF Bay Area
Default

Good advise but I am just lazy doing that.....when you have 2 little ones to deal with....hahaha

Now I need to find a replaement for the rear one.....
Old 02-10-14 | 05:18 PM
  #6  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 30
From: FL
Default

Originally Posted by kickin8
Now I need to find a replaement for the rear one.....
Trico 14A. A 16A will fit as well.
Old 02-11-14 | 10:42 AM
  #7  
kickin8's Avatar
kickin8
Thread Starter
2IS/2RX/4RX
iTrader: (1)
 
Joined: Feb 2007
Posts: 6,851
Likes: 27
From: SF Bay Area
Default

Originally Posted by RX330inFL
Trico 14A. A 16A will fit as well.
Thank you sir!
Old 02-11-14 | 02:50 PM
  #8  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 30
From: FL
Default

Originally Posted by mandyfig
Why did I not think of this strategy! Makes good sense. It took me a while replacing the inserts on my IS!
Perhaps it is a military thing. Why buy when when you can buy two for twice the price mentality. Perhaps it is from my time at the track when you do not have a part in hand and you had to go out to a spectator's car to pull a part off a production vehicle to get through the night.

I have a number of "just in case" items in my kit stored in the back. Fuses, tire valve caps, wiper inserts, etc.
Old 02-28-14 | 02:20 AM
  #9  
kickin8's Avatar
kickin8
Thread Starter
2IS/2RX/4RX
iTrader: (1)
 
Joined: Feb 2007
Posts: 6,851
Likes: 27
From: SF Bay Area
Default

Originally Posted by RX330inFL

Trico 14A. A 16A will fit as well.
I timed myself....took me 2 minutes from start to finish....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SUNUK
ES - 5th Gen (2007-2012)
7
04-29-18 11:25 AM
tradosauru
LS - 3rd Gen (2001-2006)
23
12-25-15 12:05 PM
ShawnOk
SC430 - 2nd Gen (2001-2010)
13
11-02-15 10:56 AM
tedward88
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
5
11-03-11 10:10 PM
man0fsteel
GS - 3rd Gen (2006-2011)
15
11-27-10 06:50 AM




All times are GMT -7. The time now is 05:37 PM.