Is there any rx330 with mods out thetr
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2018
Location: Tx
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Is there any rx330 with mods out thetr
I had my 2004 rx330 since 2008 and just purchased a larger suv for my family...I just couldn’t sell it because of sentimental value and decided to do this to it
Trending Topics
The following 3 users liked this post by exaktoh:
#9
Driver School Candidate
I like this look, what coil-overs are you running?... Looks like CX racing.... but correct me if I'm wrong...
The following users liked this post:
adamajw7 (01-13-23)
#13
Driver School Candidate
i had a local shop fabricate 2 inch strut spacers to fit the 32 inch Atturo trailblade x/t, magnaflow catback, K&N, Moog sway bar links, masterpro heavy duty cv axles and I have a lot more planned but that’s where I’m sitting now
The following users liked this post:
nickmpls (01-05-23)
#14
The following users liked this post:
nickmpls (01-05-23)
#15
Driver School Candidate
good stuff. I'm running a slightly larger than stock tire (29") on aftermarket wheels, but am thinking about lifting it a bit. I have read that 08-13 highlander rear struts will give 1-2" of lift in the back, but haven't figured out if they will work with lexus springs or not, and haven't come up with a front suspension lift yet other than spacers or springs. Would rather run stock springs for ride and run a taller strut by about 1". That being said, I would love to have the option to raise or lower it when I feel, so I am considering coilover or air suspension, but don't want it to ride like a go kart or leak air, so I really don't know what I want to do. Here is how mine sits: