passenger temperature won't cool
03-13-23, 05:07 PM
#1
1st Gear
Thread Starter
Join Date: Aug 2018
Location: co
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
passenger temperature won't cool
My 2010 RX350 appears to have a stuck blend door. No matter where you put the temperature it comes out luke warm on the passenger side.
This includes a/c. From what I've read this may be a faulty actuator for the passsenger blend door.
I've disassembled the glove box and air bag and removed the plastic trim pieces. I cannot go any further with the youtube videos I've found. Does anyone know where to get tech instructions for replacing the blend door actuator? Lexus has 8 volumes for the service manual and no index that I can find.
Also, what is the part # for the actuator ?
What is the part # for the temperature control module as well?
thanks in advance.
Frustrated in Colorado Springs
This includes a/c. From what I've read this may be a faulty actuator for the passsenger blend door.
I've disassembled the glove box and air bag and removed the plastic trim pieces. I cannot go any further with the youtube videos I've found. Does anyone know where to get tech instructions for replacing the blend door actuator? Lexus has 8 volumes for the service manual and no index that I can find.
Also, what is the part # for the actuator ?
What is the part # for the temperature control module as well?
thanks in advance.
Frustrated in Colorado Springs
03-14-23, 08:25 AM
#2
Moderator
Rock auto is advertising repair manual. Investing in that can be very helpful.
You can then visit online Lexus part supplier and drill down their web site to the actual part number based on on your vehicle.
Salim
You can then visit online Lexus part supplier and drill down their web site to the actual part number based on on your vehicle.
Salim
Thread
Thread Starter
Forum
Replies
Last Post
MRCDWJR
2Gen GS430 / 400/ 300 Classifieds (98-05)
0
08-08-15 02:04 AM