RX - 3rd Gen (2010-2015) Discussion topics related to the 2010 - 2015 RX350 and RX450H models

2010 rx450h center console cup holder lid does not fully open

Thread Tools
 
Search this Thread
 
Old 10-21-23, 11:01 AM
  #1  
ZorkNation
10th Gear
Thread Starter
 
ZorkNation's Avatar
 
Join Date: Oct 2023
Location: OR
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default 2010 rx450h center console cup holder lid does not fully open

2010 rx450h center console cup holder lid does not open all the way. Maybe something fell behind it and got stuck. Does anyone know of a guide to take it apart without breaking it? Thanks.
Mark

photo of center console cup holder with jammed lid
Old 10-22-23, 07:35 AM
  #2  
Clutchless
Moderator
 
Clutchless's Avatar
 
Join Date: May 2005
Location: VA
Posts: 5,844
Received 1,160 Likes on 990 Posts
Default

There is probably something stuck down in the slot where the lid goes.
You can remove the center part of the cupholder and it may make it easier to move the top around.
Grab the center piece that separates the 2 sections and lift it out.
Then get a flashlight and try to look into the slot area where the top folds into when lifted. I bet something is stuck in there.
Old 10-22-23, 08:11 AM
  #3  
ZorkNation
10th Gear
Thread Starter
 
ZorkNation's Avatar
 
Join Date: Oct 2023
Location: OR
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Clutchless
Grab the center piece that separates the 2 sections and lift it out.
Then get a flashlight and try to look into the slot area where the top folds into when lifted. I bet something is stuck in there.
Yes, I have tried that. There's no way to look behind it without taking it apart. I'm looking for a guide to take it apart.
Old 10-22-23, 03:25 PM
  #4  
Clutchless
Moderator
 
Clutchless's Avatar
 
Join Date: May 2005
Location: VA
Posts: 5,844
Received 1,160 Likes on 990 Posts
Default

See this older thread which links to an even older thread with the solution
​​​​​​https://www.clublexus.com/forums/rx-...ully-open.html
Old 10-22-23, 03:48 PM
  #5  
ZorkNation
10th Gear
Thread Starter
 
ZorkNation's Avatar
 
Join Date: Oct 2023
Location: OR
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Clutchless
See this older thread which links to an even older thread with the solution
​​​​​​https://www.clublexus.com/forums/rx-...ully-open.html
Thank you!! :-) I searched but I didn't find that.
Old 10-23-23, 07:58 AM
  #6  
Canucks
Driver School Candidate
 
Canucks's Avatar
 
Join Date: Oct 2020
Location: BC
Posts: 17
Likes: 0
Received 4 Likes on 4 Posts
Default

So you can remove the whole thing and then remove the Cup holder assumbly from the centre console.
  • Unscrew shift ****
  • Use trim tool to pry up centre console. It's one big piece from heated seat controls to shifter assembly (the part that shows what gear you pick)
  • You can either detach all the little connectors or just lean it to one side once you get it over the shifter
  • There are four or five #2 Phillip screws that hold the cup holders in place. Remove those and you can take the whole thing out.
  • From there you can disassemble further as the cup holders are in their own box so to speak
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LaurelK7
ES - 6th Gen (2013-2018)
1
05-09-22 12:36 PM
phxjcc
LX - 3rd Gen (2008-2021)
2
10-06-18 07:32 PM
DianeB
RX - 3rd Gen (2010-2015)
0
04-02-18 08:49 AM
net4n6
SC- 1st Gen (1992-2000)
14
09-08-14 07:07 PM
Casawolves
RX - 1st Gen (1999-2003)
1
05-31-14 07:50 PM



Quick Reply: 2010 rx450h center console cup holder lid does not fully open



All times are GMT -7. The time now is 04:06 AM.