My first mod - no more amber blinkers
#16
Lexus Fanatic
iTrader: (1)
I got mine from eBay too. The company is MotiveMods. I bought the last two they listed but you can get it from their site too.
http://www.motivemods.com/Philips-Si.../phi-sv-wy.htm
To lose the amber in the back is worth the price Installation is very easy. Now if I can only figure out the front bulbs
http://www.motivemods.com/Philips-Si.../phi-sv-wy.htm
To lose the amber in the back is worth the price Installation is very easy. Now if I can only figure out the front bulbs
Last edited by Joeb427; 01-02-11 at 06:36 AM.
#17
No, I don't play soccer!
I guess they stocked up just in time for everyone else to get them
My RX will get a long overdue bath today. I will put one of the old bulbs in to do a true color comparison. Right now it's hard to see through the salt
FYI, the instructions in the manual shows using a screwdriver on the side to pop open the cover. I used my trusty plastic shopping card, inserting it on the side like the illustration. I started toward the bottom and brought it up and over the top. The cover will pop open at the top. The tabs are on the bottom.
My RX will get a long overdue bath today. I will put one of the old bulbs in to do a true color comparison. Right now it's hard to see through the salt
FYI, the instructions in the manual shows using a screwdriver on the side to pop open the cover. I used my trusty plastic shopping card, inserting it on the side like the illustration. I started toward the bottom and brought it up and over the top. The cover will pop open at the top. The tabs are on the bottom.
#18
Lexus Fanatic
iTrader: (1)
I guess they stocked up just in time for everyone else to get them
My RX will get a long overdue bath today. I will put one of the old bulbs in to do a true color comparison. Right now it's hard to see through the salt
FYI, the instructions in the manual shows using a screwdriver on the side to pop open the cover. I used my trusty plastic shopping card, inserting it on the side like the illustration. I started toward the bottom and brought it up and over the top. The cover will pop open at the top. The tabs are on the bottom.
My RX will get a long overdue bath today. I will put one of the old bulbs in to do a true color comparison. Right now it's hard to see through the salt
FYI, the instructions in the manual shows using a screwdriver on the side to pop open the cover. I used my trusty plastic shopping card, inserting it on the side like the illustration. I started toward the bottom and brought it up and over the top. The cover will pop open at the top. The tabs are on the bottom.
#20
No, I don't play soccer!
Ah, time to call the installer. Lesson learned, pull the bulb before ordering because I can't trust the manual Thanks Tran. I'm really liking the rear blinkers
#23
Lexus Test Driver
Thanks for the help. I had found those at that web site, I guess I expected more sites to carry them. I'm sorry but, I think $50 for 4 little bulbs is expensive. I would do the LED's but then you have to mess with other aspects of the system.
Anita you want to sell me the ones you can't use?
Otherwise I will bite the bullet.
Anita you want to sell me the ones you can't use?
Otherwise I will bite the bullet.
#24
No, I don't play soccer!
#25
No, I don't play soccer!
#27
No, I don't play soccer!
OK, between rain showers I put one of the OE bulbs back in and did a side by side comparison. Pretty close I'd say. SilverVision is on the left, OE on the right.
#29
No, I don't play soccer!
Here is a picture of my high tech pry tool. The corners are getting a little bent though. Time to visit the courtesy desk for a new one. Best part, it's free
#30
Lexus Test Driver
Anita
Thanks for the pics it's nice to see them in action. The new ones are a tinge yellower which is fine by me. Another thing to make the RX stand apart.
Plastic putty knife works for a pry tool as well, that's what I use.
Thanks for the pics it's nice to see them in action. The new ones are a tinge yellower which is fine by me. Another thing to make the RX stand apart.
Plastic putty knife works for a pry tool as well, that's what I use.