RX - 3rd Gen (2010-2015) Discussion topics related to the 2010 - 2015 RX350 and RX450H models

cannot pull out the engine oil dipstick

Thread Tools
 
Search this Thread
 
Old 05-14-14 | 02:17 PM
  #1  
CAC1's Avatar
CAC1
Thread Starter
Rookie
 
Joined: Jul 2012
Posts: 28
Likes: 2
From: PA
Default cannot pull out the engine oil dipstick

Last had the engine oil changed by the dealer awhile back on my 2013 RX 350. went to check the engine oil today and lo and behold I cannot, for the life of me, pull out the engine oil dipstick. I feel that if I pull any harder I'll pull the handle off. really weird

Any thoughts?
Old 05-14-14 | 04:41 PM
  #2  
txes's Avatar
txes
Lead Lap
 
Joined: Feb 2013
Posts: 439
Likes: 0
From: Texas
Default

Pull harder...
Old 05-14-14 | 06:06 PM
  #3  
tlavergne's Avatar
tlavergne
Driver School Candidate
 
Joined: Apr 2014
Posts: 10
Likes: 0
From: Ohio
Default

I have the same problem.
Old 05-14-14 | 07:02 PM
  #4  
JMH777's Avatar
JMH777
Driver School Candidate
 
Joined: Sep 2013
Posts: 1
Likes: 0
From: PA
Default

My 2011 CPO was like that when I bought it last year. With a little twist and a hard pull, it came out. I then applied a little motor oil to the rubber O-ring gasket and now it's fine.
Old 05-15-14 | 02:33 PM
  #5  
LeoDLion's Avatar
LeoDLion
Lead Lap
 
Joined: Sep 2009
Posts: 462
Likes: 4
From: NV
Default

I have another car and I did pull the handle and broke it. Did you try twisting it back and forth? Be careful.
Old 05-15-14 | 02:58 PM
  #6  
fastnoypi's Avatar
fastnoypi
Racer
 
Joined: Nov 2009
Posts: 1,565
Likes: 83
From: NJ
Default

strange..maybe theres a vacuum. Try taking off your oil filler cap and trying again.
Old 05-15-14 | 03:32 PM
  #7  
Hoovey689's Avatar
Hoovey689
Moderator
iTrader: (16)
 
Joined: Oct 2008
Posts: 42,327
Likes: 129
From: California
Default

Never had that problem.. being from PA area maybe the dipstick seized in the cylinder?
Old 05-15-14 | 04:24 PM
  #8  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 30
From: FL
Default

You are under warranty. Take it back to the dealer and let them remove it or break it. This should be a no charge item. After all, you were only trying to check the fluid level. Make sure you can do it yourself while you are still on the lot after they "fix" it.
Old 05-16-14 | 08:23 PM
  #9  
Yurka's Avatar
Yurka
Intermediate
 
Joined: Dec 2011
Posts: 400
Likes: 14
From: NY
Default

ive had such issue, i tried pulling it as hard as i could, and i bench almost 350 i couldnt take it out, few days later i was putting in windshield washing fluid and decided to give it a try again, it went with ease, no force was applied. No idea why
Old 05-17-14 | 04:20 PM
  #10  
LeoDLion's Avatar
LeoDLion
Lead Lap
 
Joined: Sep 2009
Posts: 462
Likes: 4
From: NV
Default

Maybe the heat expanded the tip and it got lodged somewhere down there. Then it cooled down and got free.
Old 05-17-14 | 10:17 PM
  #11  
raylor4's Avatar
raylor4
Instructor
 
Joined: Oct 2013
Posts: 908
Likes: 59
From: Lincon, CA
Default Dip Stick Dilemma

Originally Posted by CAC1
Last had the engine oil changed by the dealer awhile back on my 2013 RX 350. went to check the engine oil today and lo and behold I cannot, for the life of me, pull out the engine oil dipstick. I feel that if I pull any harder I'll pull the handle off. really weird

Any thoughts?
I would take the car back to the tech who serviced it. I would make an appointment and talk to the person who signed it off. Something is amiss.
Ray A.
Old 05-19-14 | 03:04 PM
  #12  
rxsuperman's Avatar
rxsuperman
Driver
 
Joined: Sep 2011
Posts: 182
Likes: 0
From: VA
Default

Whoever last installed the dipstick, if you force it into the tube straight without a slight twist, this is the result so take it back to the dealer....
Old 05-20-14 | 07:57 AM
  #13  
raylor4's Avatar
raylor4
Instructor
 
Joined: Oct 2013
Posts: 908
Likes: 59
From: Lincon, CA
Default

Originally Posted by Yurka
ive had such issue, i tried pulling it as hard as i could, and i bench almost 350 i couldnt take it out, few days later i was putting in windshield washing fluid and decided to give it a try again, it went with ease, no force was applied. No idea why
You aren't pulling on the automatic transmission dipstick, are you? That one has a clip lock on it.
Ray A.
Old 05-20-14 | 08:28 AM
  #14  
nipponbird's Avatar
nipponbird
Lead Lap
 
Joined: Jan 2014
Posts: 694
Likes: 1
From: Rep of South Africa
Default

That's the type of thing I would like to know what the outcome is. Even if you take it to the dealer, ask for an honest explanation and please let us know. If this happens to me, I hope there are no kids around, cause they will surely learn a lot of new words.
Old 05-20-14 | 04:10 PM
  #15  
raylor4's Avatar
raylor4
Instructor
 
Joined: Oct 2013
Posts: 908
Likes: 59
From: Lincon, CA
Default

Originally Posted by nipponbird
That's the type of thing I would like to know what the outcome is. Even if you take it to the dealer, ask for an honest explanation and please let us know. If this happens to me, I hope there are no kids around, cause they will surely learn a lot of new words.
Nipponbird - I agree and very cleverly written.
Ray A.



All times are GMT -7. The time now is 01:25 PM.