Removing the console vent covers
#1
Removing the console vent covers
I'm trying to remove the middle console vent cover to install a kuda mount. It says to pry a bit with plastic tools right to the right of the vent between the plastic and the leather/pleather. Getting nervous and don't want to crack the cover or damage anything. Anyone have any experience?
#2
There are specialty tools for this, such as these http://www.harborfreight.com/automot...set-67021.html or these http://www.harborfreight.com/5-piece...set-99739.html
that should be able to pop it loose without scratching anything. Having said that, I have not done this on the piece you describe in the RX and there is always a risk of breakage. I have the cheaper set of these tools and they do work as advertised on interior trim. You may find similar tools locally at an auto parts store.
that should be able to pop it loose without scratching anything. Having said that, I have not done this on the piece you describe in the RX and there is always a risk of breakage. I have the cheaper set of these tools and they do work as advertised on interior trim. You may find similar tools locally at an auto parts store.
Last edited by Clutchless; 10-06-15 at 01:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Enforcer84
GS - 2nd Gen (1998-2005)
2
03-27-18 10:42 AM