Remove tow bumper cover from 2015 RX 350
#1
Remove tow bumper cover from 2015 RX 350
Can anyone tell me how to remove the hitch cover from my 2015 RX 350? Once it's removed, is my vehicle already equipped with wiring? Thanks!!
Kimberly
Kimberly
#2
I suggest you do some searching here on hitch installation. I see this is your first post, welcome to Club Lexus.
The wiring is up inside the rear bumper, if you have the tow preparation package. Those threads tell you how to determine if you have the tow prep package, and find the wiring. Hint, if inside the front left fender liner toward the front there are air vents, you likely have it as those are for the transmission cooler.
There is no hitch cover, per se. You have to buy your own hitch and it mounts below the bumper. Again, do a search.
The wiring is up inside the rear bumper, if you have the tow preparation package. Those threads tell you how to determine if you have the tow prep package, and find the wiring. Hint, if inside the front left fender liner toward the front there are air vents, you likely have it as those are for the transmission cooler.
There is no hitch cover, per se. You have to buy your own hitch and it mounts below the bumper. Again, do a search.
#3
Thank you for your response. I'll do some research.
Kimberly
Kimberly
I suggest you do some searching here on hitch installation. I see this is your first post, welcome to Club Lexus.
The wiring is up inside the rear bumper, if you have the tow preparation package. Those threads tell you how to determine if you have the tow prep package, and find the wiring. Hint, if inside the front left fender liner toward the front there are air vents, you likely have it as those are for the transmission cooler.
There is no hitch cover, per se. You have to buy your own hitch and it mounts below the bumper. Again, do a search.
The wiring is up inside the rear bumper, if you have the tow preparation package. Those threads tell you how to determine if you have the tow prep package, and find the wiring. Hint, if inside the front left fender liner toward the front there are air vents, you likely have it as those are for the transmission cooler.
There is no hitch cover, per se. You have to buy your own hitch and it mounts below the bumper. Again, do a search.
#4
Here's a link that shows the model number of the Curt trailer hitch for the 2015 RX350.
http://www.curtmfg.com/part/13143#tab=all
They have a install video also..
Hope that helps
T
http://www.curtmfg.com/part/13143#tab=all
They have a install video also..
Hope that helps
T
Thread
Thread Starter
Forum
Replies
Last Post
zxedxz
RX - 3rd Gen (2010-2015)
7
02-18-14 08:27 PM