HiHoSilver

Thanks for your feedback, I too agree about the sequential on V2 looking better than the V3 but don't know if I'll base my decision on that alone. I do find it strange that the V2 cost MORE than the V3, that being said, I'm leaning towards the V3 design as it is less in price and easier to install. However, I.m still not 100% sure which one I should get, very tough choice. Question, the cable that oxidized... do you think that will happen again ?
Thanks again !
AL

silva1181

When I checked the site it looks like these only fit 2015 and newer, is this correct? So they don't offer for a 2013 model?

HiHoSilver

Hi Silva...
I found this on the their website... see the last line about compatible years... If you have any information that says otherwise, please share with the rest of us... Hope this info helps...


The long-awaited Lexus LS style fiber full LED tail V3
is now available !! It is a sequential type of flowing turn signal.
Three fibers that evenly emit light in an L shape give RX a sense of quality.
The lighting method of the brake part is also a LS style that faithfully reproduces the LS!
High-brightness LED specification with bright back and turn signal!
One side LED side marker can be turned on / off as desired.
Please choose from two colors for the tail lamp color.
(Main color is red clear type)


■ New left and right set
■ Position fiber specification
■ Blinker flowing blinker High brightness LED 12 left and right total
■ Back lamp High brightness LED 12 left and right total
■ Brake high brightness LED left and right 24 total
■ Includes high-flame prevention resistor
■ Installation instruction included ■
LED out guaranteed for 180 days ■ Equipped with
safety standards E mark


Compatible models January 2009-October 2015 Series 10 Lexus RX 270/350 / 450h (Hybrid) From

chrispy

iTrader: (21)

I have had the CrystalEye V3 installed on my wife's RX450h for over two years and they have been performing just like the day I installed them.

MacCat

Nice looking lights ! WOW

I recently had a minor bumper bash on the front end and they had to replace my headlights.
The new version had LEDs and clear lens covers - new lights make the car look brand new !
I didn't have good luck replacing the lower running lights with LED bulbs - they just didn't work!?

HiHoSilver

Thanks for the information, much appreciated. If you have any pictures, please post.
AL

HiHoSilver

MacCat,
So your new headlights have LEDs built into them ? And originally your RX did NOT have the LEDs ? If so, are the new headlights OEM or aftermarket and what name brand ?
Thanks !
AL

RX469

iTrader: (1)

Those are beautiful lights! Nice job.

silva1181

Hey HiHoSilver, thanks for posting the information. Below is the info from the OP's initial post. I clicked on the 2nd link, japanparts thinking this is where he's suggesting to buy these from based on the positive comment in the bracket. But I see now I was wrong and he's actually recommending the purchase from the first link, crystal-eye, even thought the comment is negative. I am confused, LOL!!! Anyway, I checked the crystal-eye site and the V3 costs $664 USD?

Now, If I can figure out how to order without messing up, I'll be good.

Those Tail Lights are all made in Taiwan
Informations: http://www.crystal-eye.jp/shopdetail...X/page1/order/ (the unfriendly guys who do not help and do not want to sell.)
Seller: https://www.japanparts.com/parts/detail/53687 (The Cool Guys, great Support, reliable, very fast delivery !, They organize Parts if not in the Shop available ! and export many JDM parts.)

HiHoSilver

Hi Silva, On Rakuten they are listed 39,600 Yen which is right under $400 USD. However they do not list shipping fees so I'm a little skeptical to follow through and purchase, on top of that, I've never ordered through them before so I don't know what to expect. Maybe I'll try ordering tomorrow and if I don't like what I see, I'll call credit card instantly and have them cancel the order. Amazon has V2 for about $400, and obviously I've ordered hundreds of items in the past with no issues but I'd rather the V3 as it's much easier to install and I think it looks a little cleaner. Does the $664 from Crystal Eye include shipping to the US ?

HiHoSilver

Hi Denzo, So did you order the V3's from https://www.japanparts.com/parts/detail/53687 ? That link doesn't have any listing for the older RX's, only 2015 and up... I found the V3's on Rakuten ($400.00 USD) but I'm a little skeptical trying to purchase through them so I'm looking for a better alternative.
Thanks,
AL

HiHoSilver

Hey Chrispy, Would you be able to provide the contact information on where and how you purchased these tail lights ?
Much appreciated,
AL

silva1181

HiHoSilver,

Like you, the japanparts link is where I saw the V3 fitting 2015 and newer only. On the Crystaleye link, i got as far as the price of $664 and didn't go any further to see shipping.

I'll wait to see if those who bought them will share the link from where they did the purchase with hopefully a better price then $664.

HiHoSilver

Hopefully Chrispy will come through, he's in Cali so it shouldn't cost too much more to ship to NY. I REALLY want these lights, no one in NY has anything like them and I'm sure I'll get lots of inquiries once I have them in my possession and installed.
AL

silva1181

Chrispy, said he's had the V3 version for two years. I thought the V3 version just came out as the newest?