Aftermarket Wheels
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2016
Location: MI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Wheels
Does anyone have Aftermarket Wheels on their RX? I have seen a few pics here and there. I have been thinking about it, but would like to get some ideas of what I would want.
#3
Driver School Candidate
I am currently shopping for a set of 22" Wheels for my RX.....
Im leaning towards the route of the Vossen CV1s i use to have on my old suv..... might do a 1 inch drop as well depending on how it looks.
Last ive been told my rims been discontinued so I might have to look at other brands.
Im leaning towards the route of the Vossen CV1s i use to have on my old suv..... might do a 1 inch drop as well depending on how it looks.
Last ive been told my rims been discontinued so I might have to look at other brands.
#4
Former Sponsor
iTrader: (1)
I am currently shopping for a set of 22" Wheels for my RX.....
Im leaning towards the route of the Vossen CV1s i use to have on my old suv..... might do a 1 inch drop as well depending on how it looks.
Last ive been told my rims been discontinued so I might have to look at other brands.
Im leaning towards the route of the Vossen CV1s i use to have on my old suv..... might do a 1 inch drop as well depending on how it looks.
Last ive been told my rims been discontinued so I might have to look at other brands.
-Ralph
#5
Driver School Candidate
Join Date: Aug 2016
Location: AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Tread lightly. I have done this with two separate 4Runners and it never road even close to factory. I even had them put the factory tires and novo. Never could eliminate vibration. I won't do it again on a Toyota product. I have the Lexus 20's and love them.
#6
I'm wanting to step up from the factory wheels as well. They ride too smooth for me. Those CV1's are boss.
Update: 22" Vossen CVT Gloss Graphite (22x10.5") Deep Face Concave on my 4RX:
Update: 22" Vossen CVT Gloss Graphite (22x10.5") Deep Face Concave on my 4RX:
Last edited by Darith; 11-15-16 at 09:45 PM.
#7
Driver School Candidate
Trending Topics
#9
Driver School Candidate
Just got them over the weekend. I love the wheels. But they aren't as flush with fender as I wanted them. I will probably add a 5mm spacer all around. I was scared 22x10.5 would be too wide and stick outside the fender.
Niche M157 | 22x9 ET 38 | 265/40/22 Toyo Proxies.
Niche M157 | 22x9 ET 38 | 265/40/22 Toyo Proxies.
Last edited by 714guy; 09-21-16 at 12:50 PM.
#10
Driver School Candidate
I ended up going with the VFS1 22x10.5 .... should be on the car in couple weeks.
#11
Driver School Candidate
My wife isn't complaining about the ride so it good. It a little nosier but i think the tires might be over inflated will have to check. Can't wait to see your 10.5s. Should've waited for you before getting my wheels. All the 22's i saw on the forum were 22x9. but the offset was 30.
#12
Driver School Candidate
Bad picture i know but i found someone posted his ride on youtube w/ 22" Vossen CVT Rims ... he claims vossen made him a special set at 11.5 !!! but i think he really meant 10.5
Also from the video feed i know he's running 265/45R22 tires... I also noticed he put his Front LEFT and RIGHT rims backwards(maybe he did it on purpose) here is a link to the video.
Also from the video feed i know he's running 265/45R22 tires... I also noticed he put his Front LEFT and RIGHT rims backwards(maybe he did it on purpose) here is a link to the video.
#15
Driver School Candidate
Just wanted to bump this thread to report what i went through at my local auto shop.
Ordered Vossen VFS1 22" . i didnt know too much about rims so I let the guy at the shop order the wheels and tires for me.... i basically just told him Vossen VFS1 22" 10.5 all around w/ Toyo tires... I let the shop decide the OFFSET and tire size. Waited 2 weeks for the wheels to come in and got the appointment to get them install today.... unfortunately the rear tires DO NOT clear the shock and one of the arms.... I would have to get a 20mm spacer at least on the rears for it for work/clear.... I am a horrible driver and our roads are in real bad condition where I live so I really didnt want to go with 20mm spacers.... The shop said theyll reorder with vossen tomorrow since they have a lower offset that will clear.... (i dont remember the exact offset numbers ) but i will try to get that info tomorrow... just wanted to pass this along to my fellow CL members.
Ordered Vossen VFS1 22" . i didnt know too much about rims so I let the guy at the shop order the wheels and tires for me.... i basically just told him Vossen VFS1 22" 10.5 all around w/ Toyo tires... I let the shop decide the OFFSET and tire size. Waited 2 weeks for the wheels to come in and got the appointment to get them install today.... unfortunately the rear tires DO NOT clear the shock and one of the arms.... I would have to get a 20mm spacer at least on the rears for it for work/clear.... I am a horrible driver and our roads are in real bad condition where I live so I really didnt want to go with 20mm spacers.... The shop said theyll reorder with vossen tomorrow since they have a lower offset that will clear.... (i dont remember the exact offset numbers ) but i will try to get that info tomorrow... just wanted to pass this along to my fellow CL members.