Clean Wireless Charging Solution
#16
#17
I just completed my own Sunday clean wireless charging project after receiving my iPhone X earlier this week. I basically redesigned my previous solution to support Qi wireless charging.
Pros:
Cons: Cable still visible and Qi receiver is bulky (they do make smaller ones though)
........................
Pros:
-magnetic - just throw it on without any alignment and it starts charging. Also easy to grab and go
-phone is closer to eye level (less looking up and down and refocusing)
-still able to use the cup holders without blocking the phone
-compatible with tons of cheap Qi receivers
-phone is closer to eye level (less looking up and down and refocusing)
-still able to use the cup holders without blocking the phone
-compatible with tons of cheap Qi receivers
Cons: Cable still visible and Qi receiver is bulky (they do make smaller ones though)
........................
also is there links or more information to the parts used for mounting and charging please.
thanks so much!!
currently using these in both vehicles, but i think they left a oily residue and i would hate to mark up my new dash it uses a 17mm ball.
Last edited by JSracer; 01-01-18 at 06:01 AM.
#18
hello, any update how your solution is working out ??
also is there links or more information to the parts used for mounting and charging please.
thanks so much!!
currently using these in both vehicles, but i think they left a oily residue and i would hate to mark up my new dash it uses a 17mm ball.
https://www.amazon.com/Garmin-010-11...001S2RCWI?th=1
also is there links or more information to the parts used for mounting and charging please.
thanks so much!!
currently using these in both vehicles, but i think they left a oily residue and i would hate to mark up my new dash it uses a 17mm ball.
https://www.amazon.com/Garmin-010-11...001S2RCWI?th=1
https://www.ebay.com/itm/272967516301 - magnetic mount
https://www.ebay.com/itm/112641219166 - qi charger magnetic mount
So far I like the qi charger more than my old magnetic mount. When using GPS, the phone will barely increase charge but the convenience factor is worth it. I can just slap my phone on and pull it off when I am out and about. If I want to charge my phone faster, I still have the option of plugging in a cable.
Both mounts come with 3M VHB tape which is designed for car surfaces and can be cleanly removed.
#21
#22
I purchased a Qi charger from Amazon:
Amazon.com:
And a Anker Quick Charge 12vt plug:
All together it was about $30.00
It works and fits perfectly for my Samsung S7 - phone stays put and no sunglasses blowing up :-)
Amazon.com:
https://www.amazon.com/Docooler-Wireless-Charger-Charging-Smartphone/dp/B00W1VSFQW/ref=pd_sbs_147_2?_encoding=UTF8&pd_rd_i=B00W1VSFQW&pd_rd_r=E4AQA0R4S1KDHTN0KGV6&pd_rd_w=4hgvs&pd_rd_wg=8wHbW&psc=1&refRID=E4AQA0R4S1KDHTN0KGV6
And a Anker Quick Charge 12vt plug:
Amazon.com: Quick Charge 3.0, Anker 24W USB Car Charger (Quick Charge 2.0 Compatible) for Galaxy S7/S6/Edge/Plus, Note 4/5, Nexus 6, iPhone, LG G5 V10, Samsung Fast Charge Qi Wireless Charging Pad and More: Electronics
You need to use this type of plug to get at least 2 amps to go to the Qi charger.All together it was about $30.00
It works and fits perfectly for my Samsung S7 - phone stays put and no sunglasses blowing up :-)
Last edited by ghabicht; 01-03-18 at 02:31 PM. Reason: bad link
The following users liked this post:
JSracer (01-03-18)
#23
^^^ the magnetic charging system is very cool. It doubles as a mount and charger.
I only wish it could fast charge. Can these Ebay magnetic qi chargers be dismantled and we can put our own charging coils in there?
I only wish it could fast charge. Can these Ebay magnetic qi chargers be dismantled and we can put our own charging coils in there?
#24
I can confirm that it fast charges and also fits the Samsung Galaxy S8 Plus with a plastic case. I'd guess it'll do the same for the iPhone. If you need photos, I'll be glad to post some. I've got it mounted left of the clock attached to the A/C vent. You'll need a micro usb cable and which support fast charging. You can buy a flat micro usb cable and run the cable neatly under the panels for a cleaner look.
#25
Aftermarket Qi car charger
we just ordered a 2018 RX and I noticed that here in the states, we don’t have the option of the wireless phone charger. I know there’s the perfect cubby in front of the shifter to place a flat charger with a plug in next to it to keep wires at a minimum. What are you guys using to charger your phones?
#27
Add Wireless Charging to your RX for $50!!!!
I recently bought an RX350 F Sport, and was very somewhat disappointed that it didn't have wireless charging. Well, i added wireless charging for $50!!!! For those interested, here's a tutorial. Tell me what you guys think....
Bought from ECS Tuning for $50
1. Remove side panels
2. Remove trim around radio and unplug Start Button
3. Remove Joystick by pulling up and unplug it
4. Unscrew Shift **** and remove the two screws
5. Move Shifter to Drive, Pull the whole piece back then lift up
6. Lift whole piece up and unplug the front plugs
7. Swing it to the passenger side and use something to protect your seat
8. Unclip the white clip
9. Pull tray out and unplug the Light and Cigarette Lighter plug (put Shifter in Drive for more room)
10. Shave down those fins under the tray so charger can sit flush
11. Tape the Charger to the tray
12. Connect the T-Tap to the Cigarette Lighter Plug(white blue = 12V+, white brown = 12V-)
13. Connect charger, put everything back together and you are done!!!
As you can below that my iPhone X is sitting in the tray and charging.....
Bought from ECS Tuning for $50
1. Remove side panels
2. Remove trim around radio and unplug Start Button
3. Remove Joystick by pulling up and unplug it
4. Unscrew Shift **** and remove the two screws
5. Move Shifter to Drive, Pull the whole piece back then lift up
6. Lift whole piece up and unplug the front plugs
7. Swing it to the passenger side and use something to protect your seat
8. Unclip the white clip
9. Pull tray out and unplug the Light and Cigarette Lighter plug (put Shifter in Drive for more room)
10. Shave down those fins under the tray so charger can sit flush
11. Tape the Charger to the tray
12. Connect the T-Tap to the Cigarette Lighter Plug(white blue = 12V+, white brown = 12V-)
13. Connect charger, put everything back together and you are done!!!
As you can below that my iPhone X is sitting in the tray and charging.....
Last edited by bngu1; 10-18-18 at 10:08 PM.
The following 2 users liked this post by bngu1:
elimmigran (04-04-19),
SoCalRX (10-18-18)
#28
I recently bought an RX350 F Sport, and was very somewhat disappointed that it didn't have wireless charging. Well, i added wireless charging for $50!!!! For those interested, here's a tutorial. Tell me what you guys think....
Bought from ECS Tuning for $50
..............
Bought from ECS Tuning for $50
..............
second, was it relatively easy to disassemble the vehicle, any issues or problems you ran into during the process ??
(need to pull the deck for a add on install, beatsonic with screen mirroring )
thanks again, looks great!!
#29
Nice write up, question, this doesn't list charging spec, so i would guess its slow charging and not fast like many phones are able to charge at.
second, was it relatively easy to disassemble the vehicle, any issues or problems you ran into during the process ??
(need to pull the deck for a add on install, beatsonic with screen mirroring )
thanks again, looks great!!
second, was it relatively easy to disassemble the vehicle, any issues or problems you ran into during the process ??
(need to pull the deck for a add on install, beatsonic with screen mirroring )
thanks again, looks great!!
#30
guessing this is a slow charger, not sure what phone you have and if it fast charges
thanks again for this, it should help others