tonygaa55

One thing I have seen consistent across a couple different reviews is that the driver monitor loctaed right above the steering wheel consistently beeps at you when turning the wheel. Does anyone who owns this have that same experience? Wondering if it was just a glitch in the pre production cars. It seems like a deal breaker if that literally beeps everytime your turning the wheel

lexusnyca

Can it be turned off? Or does turning it off, disable the automatic cruise control as well?

Hefty

It sounds like it’s part of the driver assist package which I think can be disabled. Most of the reviews I’ve seen recommend disabling the whole system because of its sensitivity.

pikenp

You can turn it off.

pikenp

There’s a “Proactive Driver Assist” mode which is the only thing I turn off because it is a little too intrusive.

Of course the settings can be changed and adjusted but I prefer it off.

jer

It seems there should be some way to change the sensitivity because if it is constantly going off when the wheel is turned it kind of defeats the purpose of having it.

tonygaa55

does this also disable other safety features like collision breaking?

lexusnyca

It wouldn't be the collision braking that was disabled, it would be the start/stop feature of the automatic cruise control that would be tied to the driver attention monitor.

Julius071

Coming from a Rav4 I think its a different setting

pikenp

All other things work. It stops the constant alerts about Driver.

703

Sound faulty. Return to dealer for diagnosis.

tedward155

Yes, it can be turned off.

Jimbuck

We just picked up our RX350H and driving home we get a constant Driver Sit Up message. Hands were not blocking the sensor. Do we need to set something up to eliminate the message?

krafty81

Driver sit up? Have not seen that one!

FastFord

Is the air bag off for that seat?...If so go to the dealer as your air bag might not be functioning.

You can move the seat all the way to the back, upright seat back, or check page 41 in the manual. Search "sit up" in the owners manual.

Could be similar to the 2022 NX350 having to have the seat "programmed" to work. All the way back, forth, up, down, until it functioned correctly.

Me, I would get this resolved sooner than later.