2 Inch trailer hitch questions
#211
I had one on my 2017 Lexus RX 450h that I bought and my local Lexus dealer installed for about $200. I got one on sale for $240. My dealer Friday quoted me $600 to install. Has anyone got a Curt or other brand and what did someone charge for installing. $600 seems absurd for something that seems like less than an hour to install. No electric wiring just for two bikes.
Thanks for any help.
Thanks for any help.
Last edited by StefanoS; 03-27-24 at 10:15 AM.
The following users liked this post:
Freds430 (03-23-24)
#212
Pole Position
$600 to install a hitch seems a bit much. I installed a Draw-Tite on my wife's NX450h+ in about an hour or so. There are only four bolts which thread into four holes already in the frame. The Gen5 RX models are mounted in the same manner, only four threaded holes. The Draw-Tite unit for the Gen5 models is 76635. I opted for Draw-Tire, as the crossbar is hidden behind the bumper cover. The Curt hitches for both the current NX and RX models have the crossbar in full view below the bumper cover and I was not big on that look. If you don't need wiring for a trailer then, that is a fairly good choice.
#213
Pole Position
Had Curt bike rack hitch on my recently traded in 2017 RX450 h and liked it because it was hidden and did not stick out from the bumper. Want to get one for my 2024 RX 350h. If anyone has a Curt would you attach a pic from the side and rear to see what it looks like. Thanks so much.
Last edited by Freds430; 03-27-24 at 05:02 AM.
#214
#215
Pole Position
Thanks for the pic.
#216
Forgot to mention that there is some interference with the kick sensor. It still works but, you have to wiggle your foot around a bit. I could always relocate the sensor or go with the other small version sensor. Since I generally just use the fob or the rear hatch switch anyway, it has not been a big deal.
#219
Just installed the Draw-Tite hitch on my 2024 RX350 Ultra Luxury. You do need 2 people and I had to remove one of the muffler brackets to be able to get the hitch in place, but not that difficult.
#220
Pole Position
Forgot to mention that there is some interference with the kick sensor. It still works but, you have to wiggle your foot around a bit. I could always relocate the sensor or go with the other small version sensor. Since I generally just use the fob or the rear hatch switch anyway, it has not been a big deal.
The following users liked this post:
happy1977 (05-06-24)
#224
I am sure that this is just a "CYA" thing. I have had hitches on all of my vehicles for the past 30+ years, most of which I have installed myself. I have never re-torqued any of the hitch mounting bolts. I haven't lost a hitch/trailer yet......
#225
Wiring needed to connect tow harness
Hi,
Adding a tow hitch to my non-tow prep package 2024 RX 350h. Going to use it as an activity mount. Would still like to have the wiring to add a light accessory. I have the tow harness with the flat connector to the 4 port white female connector. Also have the power convertor to be installed at the same time as the hitch. However, i don't see the cable that runs from the converter to the lower rear section to connect the tow harness. Should this be here or will it have to be installed? I've seen conflicting opinions about it's presence. Also, I'm not seeing a part number to order this cable in the Lexus guides. figure I'm missing something here.
Thanks!
Adding a tow hitch to my non-tow prep package 2024 RX 350h. Going to use it as an activity mount. Would still like to have the wiring to add a light accessory. I have the tow harness with the flat connector to the 4 port white female connector. Also have the power convertor to be installed at the same time as the hitch. However, i don't see the cable that runs from the converter to the lower rear section to connect the tow harness. Should this be here or will it have to be installed? I've seen conflicting opinions about it's presence. Also, I'm not seeing a part number to order this cable in the Lexus guides. figure I'm missing something here.
Thanks!