DIY DVD Headrest integrate with GPS screen
#1
DIY DVD Headrest integrate with GPS screen
I bought XTRONS HD7053 Car Headrest DVD Player 7'' Digital Screen from ebay and installed yesterday. All necessary cables, remote etc. came with the headrest. You need to buy extra video spliter to integrate with gps nav screen output to both headrestsand two extra rca male couplers or male to male rca cable to connect with headrest video in with video spliter.
First: Remove both oem head rests by holding the plastic piece next to poles. It is easy to recline the seat all the way back and pull. Now you adjust seat straight.
Second: remove the both front seat backs by pressing up with both hand and pull out towards to you. It holds by two clips (up left and right side) each back seat. For the power source I use the left door sills and route to center console under the carpet and grounded with door piller ground. Here some pics:
First: Remove both oem head rests by holding the plastic piece next to poles. It is easy to recline the seat all the way back and pull. Now you adjust seat straight.
Second: remove the both front seat backs by pressing up with both hand and pull out towards to you. It holds by two clips (up left and right side) each back seat. For the power source I use the left door sills and route to center console under the carpet and grounded with door piller ground. Here some pics:
#5
Remove the center console will be easy to connect both video in and out, power, ground connections here for both headrests. Easily rca cables goes to center in dash to the radio under the carpet. You have to remove the indash lower plastic cover by infront of the center console( Red arrow in pic). To do this you need to remove the glove box.
Trending Topics
#10
It is raining here but I did some videos by my ipod touch. Here is the link: http://www.youtube.com/watch?v=hsdJi...ature=youtu.be