A Pillar Gauge Pods - 3 60 mm pods
#1
A Pillar Gauge Pods - 3 60 mm pods - Please respond by March 15
Continuation from this post (since we cannot see who voted "YES" on the poll:
https://www.clublexus.com/forums/sho...5&pagenumber=1
Without the vendor actually seeing the pillar, they quoted me 45 (+ shippping) for a partial replacement pillar with 3 pods (60 mm).
By defualt the pillar will be black abs plastic. Colormatching to tan will be available at a cost of 7.99 per pillar by request.
The vendor will not be able to make a complete replacement pillar due to the capability of the machine. The pillar will end where the roofline of the car is. Potential buyers will have to cut their original pillar and join it where the replacement pillar ends. Picture a conventional A pillar that stops at the roof/windshield. This is what the vendor can produce.
Since we have 20 potential buyers and we need 30 to start, are you guys willing to absorb the cost of 10 units. We can easily sell the 10 on ebay or CL classifieds, and redistribute the money to the 20 buyers at a later date.
The vendor will need a A pillar to start and verify pricing(he indicated pricing should not be more than 60 at the very worst case). I can send the pillar, if we have 20 buyers ready to go.
Let me know what you guys think?
Please respond to this post only if you are willing to purchase. If we have 20 names, I will contact Steve Ganz or anopther CL vendor to sponsor the group buy.
Edit: We will close this thread on March 15 midnight. Hopefully we have 20+ buyers by then, otherwise everyone is on their own in the pursuit of custom gauge pods! Thank you.
Confirmed buyers:
1. aliga
2. bambooluv
3. quickturbo
4. 95redsc
5. turbosc
6. lexusdream
7. cherplex
8. qmtran
9. jdmsoarer
10. Twinkie2000
11. TimmyD
12.
Possible:
1. supradr
Vendor: http://www.gaugepods.com/custom.html
https://www.clublexus.com/forums/sho...5&pagenumber=1
Without the vendor actually seeing the pillar, they quoted me 45 (+ shippping) for a partial replacement pillar with 3 pods (60 mm).
By defualt the pillar will be black abs plastic. Colormatching to tan will be available at a cost of 7.99 per pillar by request.
The vendor will not be able to make a complete replacement pillar due to the capability of the machine. The pillar will end where the roofline of the car is. Potential buyers will have to cut their original pillar and join it where the replacement pillar ends. Picture a conventional A pillar that stops at the roof/windshield. This is what the vendor can produce.
Since we have 20 potential buyers and we need 30 to start, are you guys willing to absorb the cost of 10 units. We can easily sell the 10 on ebay or CL classifieds, and redistribute the money to the 20 buyers at a later date.
The vendor will need a A pillar to start and verify pricing(he indicated pricing should not be more than 60 at the very worst case). I can send the pillar, if we have 20 buyers ready to go.
Let me know what you guys think?
Please respond to this post only if you are willing to purchase. If we have 20 names, I will contact Steve Ganz or anopther CL vendor to sponsor the group buy.
Edit: We will close this thread on March 15 midnight. Hopefully we have 20+ buyers by then, otherwise everyone is on their own in the pursuit of custom gauge pods! Thank you.
Confirmed buyers:
1. aliga
2. bambooluv
3. quickturbo
4. 95redsc
5. turbosc
6. lexusdream
7. cherplex
8. qmtran
9. jdmsoarer
10. Twinkie2000
11. TimmyD
12.
Possible:
1. supradr
Vendor: http://www.gaugepods.com/custom.html
Last edited by aliga; 03-14-04 at 05:41 PM.
#2
#4
Just want to make sure you know that I want to pay the extra fee for the tan color. I will also be leaving town on the 18th of this month and will be gone a little over a week, so hopefully everyone will be ready by then. Otherwise I will not be available until after. Come on people, l know there are at least 20 of you that want one of these.
#6
Trending Topics
#10
#12
Thanks to the following buyers:
Confirmed buyers:
1. aliga
2. bambooluv
3. quickturbo
4. 95redsc
5. turbosc
6. lexusdream
7. cherplex
8. qmtran
9. jdmsoarer
10. Twinkie2000
11. TimmyD
12.
Possible:
1. supradr
I am sorry we could not make this happen. I guess we are on our own again in search of custom gauge pods.
MODS: Please close the thread.
Confirmed buyers:
1. aliga
2. bambooluv
3. quickturbo
4. 95redsc
5. turbosc
6. lexusdream
7. cherplex
8. qmtran
9. jdmsoarer
10. Twinkie2000
11. TimmyD
12.
Possible:
1. supradr
I am sorry we could not make this happen. I guess we are on our own again in search of custom gauge pods.
MODS: Please close the thread.
#14
Originally posted by aliga
I am sorry we could not make this happen. I guess we are on our own again in search of custom gauge pods.
MODS: Please close the thread. [/B]
I am sorry we could not make this happen. I guess we are on our own again in search of custom gauge pods.
MODS: Please close the thread. [/B]
Thread
Thread Starter
Forum
Replies
Last Post
Pearlpower
Great Deals
2
05-08-08 10:24 AM