Pure White Cold Cathode Climate Control
#46
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
No, the input voltage is only 12 volts plus/minus 10% which is too low for a running vehicle voltage which is typically as high as 14.4 volts.
It would probably be fine. Just letting you know that cars do not run at 12 volts.
I don't have my wiring diagram in front of me but if I recall at all (this was 5 years ago) the illum circuit is a green wire with a white or yellow stripe? OLT should know this.
Just take a test light or DMM to verify which it is.
It would probably be fine. Just letting you know that cars do not run at 12 volts.
I don't have my wiring diagram in front of me but if I recall at all (this was 5 years ago) the illum circuit is a green wire with a white or yellow stripe? OLT should know this.
Just take a test light or DMM to verify which it is.
#47
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2007
Location: VA
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
No, the input voltage is only 12 volts plus/minus 10% which is too low for a running vehicle voltage which is typically as high as 14.4 volts.
It would probably be fine. Just letting you know that cars do not run at 12 volts.
I don't have my wiring diagram in front of me but if I recall at all (this was 5 years ago) the illum circuit is a green wire with a white or yellow stripe? OLT should know this.
Just take a test light or DMM to verify which it is.
It would probably be fine. Just letting you know that cars do not run at 12 volts.
I don't have my wiring diagram in front of me but if I recall at all (this was 5 years ago) the illum circuit is a green wire with a white or yellow stripe? OLT should know this.
Just take a test light or DMM to verify which it is.
So you just discarded all the white plastic casing the bulbs and used the CCFL's feet to mount on to the board right?
#48
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yup, toss all white plastic as they are just lightpipes. I didn't have feet on my tubes so I made foam rubber bases. Whatever keeps them cushioned.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
See post #2. See the black foam discs? Cushy.
#49
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2007
Location: VA
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
great info, one last question, did you have to use a solder wik to remove the solder from the lcd? i have a solder sucker would that be sufficient? i haven't soldered in 10 years and I don't want to make a mess. thanks jose!
#50
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
You are trying to desolder the LCD?
Has a replacement screen come out within the last 5 years my out-of-touch *** hasn't heard of?![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Brush up on your soldering skills before you tackle that one. Not sure which method would work best. Try each and see which you like better.
Has a replacement screen come out within the last 5 years my out-of-touch *** hasn't heard of?
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Brush up on your soldering skills before you tackle that one. Not sure which method would work best. Try each and see which you like better.
#51
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2007
Location: VA
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
You are trying to desolder the LCD?
Has a replacement screen come out within the last 5 years my out-of-touch *** hasn't heard of?![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Brush up on your soldering skills before you tackle that one. Not sure which method would work best. Try each and see which you like better.
Has a replacement screen come out within the last 5 years my out-of-touch *** hasn't heard of?
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Brush up on your soldering skills before you tackle that one. Not sure which method would work best. Try each and see which you like better.
I'm not sure how long the replacement LCD's been on ebay but ever since I bought my sc in '07 it's been there already. I have it and I also think OLT saw an actual one from a customer too. It looks exactly like OEM
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#54
Pit Crew
iTrader: (3)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Love to bring back old threads![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
I have everything in place, let me tell u this, I LOVE IT ALREADY.![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I have to ask CleanSC, where did u connect the power of those lights? this is because, I want FULL power to the lightsduring day time, and less than full or may be half power during night time. i do not want those lights disturb me when i am driving at night, because IT IS BRIGHT !!![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Is factory setting of climate control lights will dim when parking light turned on?![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
If not, i may wire the power brick to the hazard light if factory setting will keep the same voltage to the climate control light no matter day and night time.
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
I have everything in place, let me tell u this, I LOVE IT ALREADY.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I have to ask CleanSC, where did u connect the power of those lights? this is because, I want FULL power to the lightsduring day time, and less than full or may be half power during night time. i do not want those lights disturb me when i am driving at night, because IT IS BRIGHT !!
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Is factory setting of climate control lights will dim when parking light turned on?
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
#55
Intermediate
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Love to bring back old threads![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
I have everything in place, let me tell u this, I LOVE IT ALREADY.![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I have to ask CleanSC, where did u connect the power of those lights? this is because, I want FULL power to the lightsduring day time, and less than full or may be half power during night time. i do not want those lights disturb me when i am driving at night, because IT IS BRIGHT !!![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Is factory setting of climate control lights will dim when parking light turned on?![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
If not, i may wire the power brick to the hazard light if factory setting will keep the same voltage to the climate control light no matter day and night time.
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
I have everything in place, let me tell u this, I LOVE IT ALREADY.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I have to ask CleanSC, where did u connect the power of those lights? this is because, I want FULL power to the lightsduring day time, and less than full or may be half power during night time. i do not want those lights disturb me when i am driving at night, because IT IS BRIGHT !!
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Is factory setting of climate control lights will dim when parking light turned on?
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
Last edited by Shayy; 07-26-13 at 10:02 PM. Reason: Measurement typo
#56
Pit Crew
iTrader: (3)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
yes, those CFLs come with 12v inverter. i just need to plug it to a power source that can provide power when the car is started. my ideas is the source i mentioned before. the only thing is, can this inverter capable dim the CFLs when parking lights is on. i guess i will find out this weekend.
#57
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I wired mine into the parking light circuit. So it's full brightness at night. It's a little bright, but nothing dangerous or horribly distracting.
As far as I know these are not dimmable. If you want to do that, I suggest going with an led matrix that you'll need to custom fab up yourself. It's been many years since I originally designed this and led's have come a long way. If I was doing it all over again, LED for sure.
Good luck!
As far as I know these are not dimmable. If you want to do that, I suggest going with an led matrix that you'll need to custom fab up yourself. It's been many years since I originally designed this and led's have come a long way. If I was doing it all over again, LED for sure.
Good luck!
#58
1JZ Single SC400
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Its great to see an old thread still come back to life. I am glad to hear that the lighting is still holding up... I just redid some of my interior lighting to a brighter LED. MO better now!!!
#59
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interested in this mod! So glad you guys have already done this. I googled SC300 lighting and found this thread!!! Subscribing for sure.
O.P, do you have any recent pics of your dashboard with these? Thanks in advance
-Mike
O.P, do you have any recent pics of your dashboard with these? Thanks in advance
-Mike
#60
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Too much work. Can get the same results with LED.
![](https://scontent-a-ord.xx.fbcdn.net/hphotos-prn1/t31.0-8/1617442_859423950750516_1984333875_o.jpg)
__________________
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
![](https://www.clublexus.com/forums/signaturepics/sigpic178522_1.gif)
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
![](https://www.clublexus.com/forums/signaturepics/sigpic178522_1.gif)