my audi A6 retrofit project.....check it out
07-17-04 | 12:55 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
my audi TT E46 retrofit project.....check it out
i did this project about 3 weeks ago......and i finally took pics.
here are some step by step during the process......
Attached Thumbnails
Last edited by indypwr; 07-26-04 at 08:35 AM .
07-17-04 | 12:57 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
our stock projector.....
Attached Thumbnails
07-17-04 | 12:59 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
this aluminum plate was custom made by a cl member here "lexus4jess".....
Attached Thumbnails
07-17-04 | 01:01 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
another pic of the brackets/plates........
Attached Thumbnails
07-17-04 | 01:03 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
new brackets on the audi projectors....
Attached Thumbnails
07-17-04 | 01:04 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
another look at the brackets on the projectors....
Attached Thumbnails
07-17-04 | 01:06 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
did the exact opening holes like the stock plates so that it's like putting the stock one back on with
no problem...
Attached Thumbnails
07-17-04 | 01:08 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
we needed to trim the screws we used ........a little bit long............hehhee
Attached Thumbnails
07-17-04 | 01:10 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
here's a pic of the projector and bracket for test fitting......
Attached Thumbnails
07-17-04 | 01:13 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
here's another pic ..... notice the gap between the projector and chrome housing. the audi projectors are
quite smaller compared to stock sc...
Attached Thumbnails
07-17-04 | 01:16 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
we fitted the "xenon" ring and it sits perfectly on the projector. we made sure that we still had space
in order to adjust the projector horizontally and vertically....
Attached Thumbnails
Last edited by indypwr; 07-17-04 at 01:36 AM .
07-17-04 | 01:17 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
here's another look....on the side.
Attached Thumbnails
07-17-04 | 01:19 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
here's the front view....it looks perfect.
Attached Thumbnails
07-17-04 | 01:20 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
with the lens back on.....
Attached Thumbnails
07-17-04 | 01:21 AM
Thread Starter
Joined: Mar 2002
Posts: 3,460
Likes: 2
From: California
another......
Attached Thumbnails