svtdubs

Here is the plan. I will be getting a TT motor with an SP61 single and SP built auto tranny in my sc300.

I want to use the GS430 wheels that are on the car for everyday driving. They look nice, and give the car a sleeper look.



This company widens wheels... http://www.weldcraftwheels.com/

I want to send them 2 of the GS wheels and have them widen them to 10 inches. Plus it would pull the wheels out flush with the fender and not have the tucked look.
I want to run 315-35-17 nitto Drag Radials to help put down the 550rwhp or so


I searched for the 315 to see if it fits and didnt find very much.
My question is does the 315 tire fit and does anyone have pics of how they look on an SC?

SoarerJzz3

If you widened the wheels, wouldn't they still sit the same way just wider. The offset would change?? Am I right??

DETUNED

My brother just got his wheels back from weldcraft and they came out SUPER nice! Check them out here

http://www.my350z.com/forum/showthre...2&page=1&pp=20

He widened them 2 more inches for a total of 10.5.

BTW:you should just throw your COBRA wheels on the SC, they'd fit nice

DETUNED

Also, I had 315/35/17's on my S14 and they fit fine with a bit of rolling. I also test fit them on the SC and they fit perfect. It also depends on the offset of the wheels to see if they would clear.

I'm running a 295/35/18 now with a plus 25mm offset wheel in the rear (10.5), but I pulled my rear fenders A LOT

AURELIOMK3

that is what i wanted to do to my supra rims thanks detuned now i know where to send them to and your brother rims came out clean what was the turn around for them to do that. i like to much haters out there

DETUNED

It took three days to get to the shop. The guy called us when they arrived at the shop and started working on them that day. Then he called three days later and said he sent them out that day. Took it another couple days to get here.

Spent around 175 each wheel for a 2" increase. The wheels were also true and balanced out perfectly.

AURELIOMK3

thanks man i think i will be calling them real soon i have been thinking about it for some time but i just made up my mind thanks

DETUNED

I just noticed you're in Orlando. Where abouts? I'm located right next to UCF and you're more than welcome to check out the wheels and welds yourself.

AURELIOMK3

ya i am the short guy with the black sc300 we were at the meet with scott we cruised to the 50 and orange meet i live right of alafaya and muculch(i can't ever spell this d** road ya i would like to check it out

DETUNED

haha, I live off of mcoulouch (I can't spell it either). I live in Carrilon right next to the old winndixie.

AURELIOMK3

hehe cool i live right down the street i live in creek wood right before the alafaya light its a small neiborhood on the right hand side. well jsut let me know when you ever got time and i will pass by to look at it .

nysupraman

doesnt that ruin the structural integrity of the wheel?

legendary

post pics.....

Here is some random info I found:
http://www.stocktonwheel.com/wheel_widening.htm
http://www.ls1tech.com/forums/showthread.php?t=10418

It might be ok...hopefully they are providing a warranty

svtdubs

anyone have pics of a nitto 315 on the SC?