MongooseGA

iTrader: (6)

You get an A+ for modding and enjoying your car, but IMO, a D for the spinners.

Happy modding

sc4009688

its really easy, all you have to do i heat the oven up to 260 and put the tails on a baking sheet and heat them in the oven for 10 minutes. (You CANT TAKE THEM OUT EARLY OR ELSE THE SEALER WILL COOL DOWN AND YOU WONT BE ABLE TO GET IT OPEN) WHEN YOU TAKE IT OUT OF THE OVEN SEPERATE THE ACTUALY LIGHT FROM THE BLACK HOUSING USING A KNIFE AND PULL IT SECTION BY SECTION ( you have to pull it kind of hard). IT DOES TAKE A COUPLE TIMES WITH PULLING PART OF IT OFF AND PUTTING IT BACK IN THE OVEN. then just take out the red part of the bottom and the orange and remove the deflector. then just put it back together. then i went to Walmart in the automotive lighting section and i bought the ICYHOT LED bulb. **you need 4of them** they are $6.52 per bulb. they are LED's bulb number 1156. feel free to ask more questions.

96sc3

iTrader: (1)

cool., after the tail mod does that tail light bulb indicator come on?

sc4009688

i dont remember seeing it on, but its on now because one of my fog lights is out.

SC400-V8

iTrader: (1)

It all looks pretty dang tight.

mkorsu

Great work on the tails SC!!!!

Not a fan of spinners....at all....but it's your ride. Do what makes you happy.

SUPRMSC

iTrader: (7)

spinners on a Lexus, SC, sports coupe? sorry thats retarded.

sc4009688

i think it looks pretty nice, but thats my opinion. they are weighted a little so when im driving under 40 they like like there floating and it looks like im sliding around. lol

Batmobile

iTrader: (2)

NJ eh... i'm not that far... right around the corner PA. nice tailights. i think you just need to drop your car alittle bit buddy... and you'll be alright. Good job though

JspecSC3

iTrader: (4)

Can I go up there and give them a good spin?
AHah. Nice lights!

Project300

I prefer to get attention when I go. Cool tails tho. Nice work.

KoSC300

Tails

Spinners

Picture Quality

legendary

Good job on the tails.

Again, diversity is what makes the modding world great.

Let's be mindful of comments fellas. Or this will be locked down

As for the spinners, not my cup of tea. Maybe in 2000.....but now I think that joker needs some nice staggered 19s or 20s and a drop. But thats me

cheungsta

Wow! nice job on the tails!! I think I might try that...looks really clean. Thanks for the DIY write up!

Ice350

iTrader: (1)

I'm not gonna say anything bad about the spinners...just that it's not my taste.