Help. Taking 97+ Tails Apart.
#1
Rookie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Help. Taking 97+ Tails Apart.
I'm going to take my 97+ tails apart to spray the orange piece red. But, I need to know what temperature to put them in the oven at. Also, how long. A write up would be even nicer. I know not many people have done this on their 97+ tails. But for those that have accomplished it, any help would be greatly appreciated. Thanks.
#4
Rookie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I know the exact thread your talking about. I actuallt have it in my favorite links. I just want to make sure, so I don't melt them or snap them.
#6
Rookie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
#7
Pole Position
Join Date: Sep 2006
Location: Tampa, Florida
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure if this is what you want but it may help a little.
https://www.clublexus.com/forums/sho...ght=headlights
https://www.clublexus.com/forums/sho...ght=headlights
Trending Topics
#8
Rookie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure if this is what you want but it may help a little.
https://www.clublexus.com/forums/sho...ght=headlights
https://www.clublexus.com/forums/sho...ght=headlights
#10
Rookie
Thread Starter
Join Date: Aug 2005
Location: Colorado
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
#15
Lead Lap
iTrader: (1)
Join Date: Jun 2006
Location: oregon
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Tail lights
Poke,
There is a post on the board by a guy that used a spray to do his lights. He did not take them apart. His looked like brand new items when he finished. In his thread he mentioned that there were a couple of sprays out there that were inferior and he ID'd the product he used. I know that you are done with yours and they look awesome, really great, but maybe you might like options when making recommendations....maybe.
The thread about taking them apart said 300 degrees for 15 min and MAKE SURE THE PLASTIC DOES NOT TOUCH ANY METAL IN THE OVEN. He suggested laying the lens on a thick layer of news print.
Again, your job leaves nothing to be desired at all.
John
There is a post on the board by a guy that used a spray to do his lights. He did not take them apart. His looked like brand new items when he finished. In his thread he mentioned that there were a couple of sprays out there that were inferior and he ID'd the product he used. I know that you are done with yours and they look awesome, really great, but maybe you might like options when making recommendations....maybe.
The thread about taking them apart said 300 degrees for 15 min and MAKE SURE THE PLASTIC DOES NOT TOUCH ANY METAL IN THE OVEN. He suggested laying the lens on a thick layer of news print.
Again, your job leaves nothing to be desired at all.
John