habitat

Hi All,

I'm sure there are dozens of post regarding headlight cleaning, but I wanted to share my experience.
Initially I had thought that my headlights were rubbish and needed to be oven-treated and opened in order to clean the insides as well (note: the seal was weak and condensation was occurring), but before I did so I thought I'd try the outside and see if I was happy enough with its result.

Well I am!
All I used was:

• Meguiar's Plastx
• Paper Towels
• Low Adhesive Masking Tape (Maybe overkill)

I masked off all the areas w/paint fearing that this stuff would hurt it, took out a paper towel and went to town.

Here are the results:
Before:


After:


Photochop to better see the difference:


The Magical Stuff!



I highly recommend this! It took me about 15 minutes and the difference is dramatic.

over40driv

Sweet, looks like just what I need, Thanks.

ACleanSC4

iTrader: (7)

nice comparisons...you only used paper towels? not even microfiber?

Try getting your hands on DA buffer...your arms will thank you...

Seize

What a big difference! It looks great!

Lucky SC

the projector area is always very hard to clean and nearly impossible to get completely clean

the high beam though, looks marvelous

TheMole

iTrader: (13)

Meguiars Plastx is good stuff. I made a thread about it a while ago. Nice results!

Son Gokou

I used Mother's Plastic Polish every 4 weeks on my headlights and they look great!!

an70n

Link Below are my results for using meiguars. Almost like new.

https://www.clublexus.com/forums/sho...=249606&page=2

JDM

This stuff is great. I did the same thing but I applied wax after hoping that it would help prevent it from yellowing up again.

96gti2.0t

yeah i also used it when i first got my car and i almost **** my pants when i was done since i got it from a friend for free( i had to go buy my own bottle i was so happy)

O. L. T.

iTrader: (17)

The before wasn't bad at all. Most members WISH that a little yellowing was their only problem.

I guess if you just want them to look good this does indeed work, but it isn't helping the cutoff or projector any at all. Like I say though, in your case, they were looking pretty good to begin with in comparison to some. The projectors could do better however.

nice wax job.

iasc300

iTrader: (1)

looks good- nice before and after

rg_gibson

i will definitely buy that stuff

Dr.Zeus

Im getting myself a bottle

1jzJzz30

nice, looks good I've used the mothers it helped but wasn't impressed I'll have to give this a try! Thanks for the tip.