How do I move dead seats in a 95 SC300?
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2007
Location: KY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Greetings all.
I've a 1995 SC300, with either a dead Seat ECU or two dead seats. I'm thinking it's the seats, the wife left the sunroof open in a rain storm and there was a serious amount of water in the floor. After drying everything out, the seats worked for a couple of days and then gradually all the motors quit responding.
I've decided to swap the seats for a set of Tan leather Supra seats, more sportier
, but I've run into a problem.
One seat is all the way back, so I can only get to the front bolts. The other is far enough forward to make getting to the front bolts impossible.
Isn't there an "emergency" release to allow the seats to fold forward and then slide out of the way for rear passengers?
I can't get even a thin boxed wrench on the hidden bolts to get these things out, and I really don't want to torch the seats loose.
I'm not opposed to cutting the leather off, and removing the foam in the seat bottom, if it'll help. It looks like there should be some kind of slide release, but either my tracks are rusted solid, or the seats simply don't do that.
Any help is appreciated.
I've a 1995 SC300, with either a dead Seat ECU or two dead seats. I'm thinking it's the seats, the wife left the sunroof open in a rain storm and there was a serious amount of water in the floor. After drying everything out, the seats worked for a couple of days and then gradually all the motors quit responding.
I've decided to swap the seats for a set of Tan leather Supra seats, more sportier
![Wink](https://www.clublexus.com/forums/images/smilies/wink.gif)
One seat is all the way back, so I can only get to the front bolts. The other is far enough forward to make getting to the front bolts impossible.
Isn't there an "emergency" release to allow the seats to fold forward and then slide out of the way for rear passengers?
I can't get even a thin boxed wrench on the hidden bolts to get these things out, and I really don't want to torch the seats loose.
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
I'm not opposed to cutting the leather off, and removing the foam in the seat bottom, if it'll help. It looks like there should be some kind of slide release, but either my tracks are rusted solid, or the seats simply don't do that.
Any help is appreciated.
#3
Lexus Champion
Join Date: Apr 2006
Location: South Florida
Posts: 2,872
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
if you can get to the front bolts thake those out and rock the seat back to forth until you brake the brackets out .then you gcan get your rachet and screw out the the peices that are on there .good luck
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#4
Lexus Test Driver
Join Date: Mar 2003
Location: Los Angeles
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Same thing happened to me during a motorswap. Aliga told me this. On the rail closest to the shifter, there is a 10mm bolt, just turn the thing, and the seat will move forward or back.
Its inside the rail itself, so when you look at it, your also looking toward the rear of the car. Hope that made sense.
Its inside the rail itself, so when you look at it, your also looking toward the rear of the car. Hope that made sense.
#6
Lexus Champion
Join Date: Apr 2006
Location: South Florida
Posts: 2,872
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Same thing happened to me during a motorswap. Aliga told me this. On the rail closest to the shifter, there is a 10mm bolt, just turn the thing, and the seat will move forward or back.
Its inside the rail itself, so when you look at it, your also looking toward the rear of the car. Hope that made sense.
Its inside the rail itself, so when you look at it, your also looking toward the rear of the car. Hope that made sense.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Trending Topics
#9
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Question.....After turning this bolt will i then be able to push my seat all the way back and then tighten it and it will stay secure? Thanks guys cuz the motor on my passenger side is dead and most of my passengers are pretty tall.
#14
Lexus Test Driver
iTrader: (17)
Join Date: Sep 2003
Location: Texas
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
People the 10mm nuts are located (slightly recessed) at the FRONT of the front seats right above the sliding rail on each side. Two to a seat. You have to get your head down right in front of the seats to see them. A flash light would be a good idea. Use a socket with a short extension. By turning the nut(s) you are just manually turning the motor gear to move the seat. It's a Lexus, these guys think of EVERYTHING.
#15
Lexus Fanatic
iTrader: (13)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
People the 10mm nuts are located (slightly recessed) at the FRONT of the front seats right above the sliding rail on each side. Two to a seat. You have to get your head down right in front of the seats to see them. A flash light would be a good idea. Use a socket with a short extension. By turning the nut(s) you are just manually turning the motor gear to move the seat. It's a Lexus, these guys think of EVERYTHING.
Jonny