yihaw

Cut springs 1.5 coils in front 2 in the rear.
Wheels are ssr d5r 19x9+40ish and 19x9.5+48ish
BFG G-Force T/As 245/40/19 and 275/40/19
plans are to get 20 mil spacers in the front 25 in the rear and swap my 245 to the rear and get some 235 225 for the front
rolled and hammered fenders all the way around. good old hammer and pipe

L_dbl_E

iTrader: (2)

Any one else can help me out with this? Dude told me it would be sunken in with the setup I have now, so what kind of spacers will I be needing to make it not so sunken in? Thanks again guys for the help.
-Lee

mitsuguy

iTrader: (2)

it shouldn't be sunken in.. he's out of his mind... it will look similar to this: [IMG][/IMG]
thats 9.5" wide with 35 mm offset... 10" with 43 is almost identical as far as where the front side of the wheel sits... maybe 3mm inboard...

L_dbl_E

iTrader: (2)

Thanks Alot Mitsu! Owe you one bro! Guess he was just trying to be a dousche I guess. Again, bro thanks!
-Lee

BSC300TT

I have a lowered boosted sc300 and I came across a good deal on some wheels. I was looking for 18's but these are 20x8.5 +40 and 20x9.5 +40. will these fit? Does any one run this setup on their sc or know some one who has it? Any pictures would be great. Thanks guys.

Ice-Tray

Wow, what a mission to read through this thread!!! Ok I have a question for you people in the know

I'm on a serious budget for some wheels and I have found a few on e-bay that I like the look of.

here are the specs:

STYLE - ST-8 HYPER MESH II
SIZE - 19x8.5
BOLT PATTERN - 5x114.3
OFFSET - 45MM
FINISH - CHROME
LIP SIZE - HUGE 2"

and....

STYLE - ST-7 HYPER MESH
SIZE - 19X8.5 FRONT 19X9.5 REAR
BOLT PATTERN - 5x114.3
OFFSET - 32MM FRONT 35MM REAR
FINISH - CHROME
LIP SIZE - HUGE 2" FRONT 3" REAR

The question I have is which one will give me more of the flush look where the wheel and fender are flush? This is my daily driver, I love the car and want it to look nice and clean. I will lower it a bit but don't want to slam it nor do i want to do any fender or camber modifications... Just lower, flush, conservative and clean.... !!!!

any constructive advice would be helpful

Thank you

Kaydee

that will be sunken...40 offsets are not that great for our car. 18s are the best for performance

Kaydee

none of them will be flush, but if you are keen on getting them, then get the staggered set with offset in the 30s. The rears can pass as 'flush' (check my sig) but the fronts will be sunken a little bit

0nePutt

im lookin to buy my first set of rims. i dont know that much about this so help would be fantastic. i want 18'' rims, and my car is not lowered. what is the max width i should look for for 18" rims? please help. thanks

Ice-Tray

Thanks Kaydee... Okay, so if i go with these sizes how low should I drop the car If I want it to look good but not extreme (I want to be able to drive over speed bumps and such; daily driver)?

what sized tires? Keeping in mind that I don't want to have to roll my fenders (though I don't really know what tat is I just want to keep the body looking clean and stock)

If these wont be flush what size will be flush without rolling, with a small drop (1-2 ")?

SIZE - 19X8.5 FRONT 19X9.5 REAR

OFFSET - 32MM FRONT 35MM REAR

LIP SIZE - HUGE 2" FRONT 3" REAR

So these rims will bring the wheels more in-line with the fender right? Thanks so much in advance this stuff is all very new to me but I'm trying to learn instead of letting someone else do all the work for me...

rollout121

I have a 94 sc300 w air ride on it I am looking to do the donz columbo wheels I wanna get some 20x10 in the back 19x9 in the front I need some help with what offset to get them in and what tires to run I want that streched look im thinking like a 255/35/20 in the back please help.

oh yea my fenders are all rolled already

WoRKeDiT

hey guys I have some VOLK GT-7's in 19x9.5 rear, my question is will a 295/30/19 be too much tire? Offset of rear wheels is 43et i think. Going on my SC with TEIN coilovers.

yihaw

has anyone run a 50 mill spacer? i am about to get 2 inch spacers for the rear and they are 19x9.5 +40(with spacers will be -10). anyone run like 11.5-12 inch wide wheels with - offset. iam going to get like 215-225 for the 9.5s

Ice-Tray

I want to put the following on my car...

19x9.5 rear/ 19x8.5 front with a 2 and 3 inch lip respectively

there is an option for a 25 offset or 35 offset which should I choose?

I want a flush look!

Thanks

C-unit

^ Go with +25, +35 will be sunken in Alot.

Here is mine:
18x10 +0 225/40R18
18x11 +0 255/35R18

Lots of fender roll and lower with Tein Super Drift.