Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5478
18x10 +2 19x11 +9 OEM Arms all around. Stance Coilovers w/ Swift Springs 30k 24k Re Valved
Work Gnosis GS2<br/>18x10J +2 - 19x11J +9<br/>Stance Coilovers Re-Valved W/ Swift 30K 24K<br/>OEM Arms Maxed Out Camber & Toe
18x10J +2 OEM Arms.
#5479
need help on tire sizes
hey guys,
I have purchased a set jnc019 which are 18x8+27 for the front and a 18x9 +25 for the rear. based on the fitment chart I have looked at both the front and rear fit without fender modification. what size tires should I run
I have purchased a set jnc019 which are 18x8+27 for the front and a 18x9 +25 for the rear. based on the fitment chart I have looked at both the front and rear fit without fender modification. what size tires should I run
#5480
need help with tire sizes asap
Wheels will be here Tuesday any help is appreciated, by the way I am lowered 1.5 inches all around and am planning to get coilovers next, thanks for any help
Last edited by GregRedSc3; 01-25-15 at 06:42 AM.
#5481
Hey guys, how would (F)19x10 +29 Med Disk (R)19x11 +24 Super Low Disk fit? Im planning on going low as can be without being slammed, if that makes sense lol. Just decently low. Might be adding a 5mm spacer to the front to clear my LS calipers.
#5482
I can't imagine you would need a spacer in front with a 10" wheel and that low of offset, unless the spoke design is crazy. At +29, you kinda sorta picked up the equivalent of a 20mm spacer, and 15mm should be enough to clear LS calipers with stock offset wheels.
#5483
My wheel and tire specs.......XXR 521 18x8.5 +25 w/ 245/35/18 & 18x10 +25 w/275/35/18
I have all four corners rolled completely flat and I am on coilovers......I still need to adjust coils a little bit to go lower...but have about a 2 finger gap all around
The fronts could use a 10 mm spacer to make it have a little poke like the rear.....they clear LS400 BBK with ease...and will most likely go with a 255/35/18 next
The rear are perfect......they do not rub at all...I may do a pull to fit 295/35/18 later on
The car has been parked for winter but I will get some newer photos with coils adjusted and 10mm spacers up front added once winter breaks...
I have all four corners rolled completely flat and I am on coilovers......I still need to adjust coils a little bit to go lower...but have about a 2 finger gap all around
The fronts could use a 10 mm spacer to make it have a little poke like the rear.....they clear LS400 BBK with ease...and will most likely go with a 255/35/18 next
The rear are perfect......they do not rub at all...I may do a pull to fit 295/35/18 later on
The car has been parked for winter but I will get some newer photos with coils adjusted and 10mm spacers up front added once winter breaks...
#5484
Right now, I'm running XXR 531s with 18x11 +20 in the rear. There is a little too much poke for my taste. Sorry for the bad pics, this was a while back and only had my phone on me at the time:
I am looking at the Cosmis Racing S5Rs that come in 18x10.5 +20. I want to be able to run a 295 or even 305 tire if possible as I'm already having major traction issues with my setup and it's only a stock 2JZGTE lol
Is 1/2" less in width a pretty decent/noticeable difference? I want the wheel to tuck back in closer to the fender, and am hoping that 1/2" will make that difference. And also, should I have any trouble running a 295 or 305?
I am looking at the Cosmis Racing S5Rs that come in 18x10.5 +20. I want to be able to run a 295 or even 305 tire if possible as I'm already having major traction issues with my setup and it's only a stock 2JZGTE lol
Is 1/2" less in width a pretty decent/noticeable difference? I want the wheel to tuck back in closer to the fender, and am hoping that 1/2" will make that difference. And also, should I have any trouble running a 295 or 305?
#5485
New wheels
Hi There! Thats my first post and it's about new wheels.I'm looking to buy 18x8 +35 235/40 front and 18x9 +35 265/40 rear.My question is will i need to roll my fenders or i can run them like that with stock suspension?
#5486
hello
much has been written about wheels and tires and i had many help with the PM's some of you send me
but i would like a final advice about the choice of tires
Falken are widely available in Europe but not as common so i don't have reviews on those , but its all about the side walls of the tires
i'm thinking Falken (what type? ) toyo proxes t1 or michelin pilot sport
for these wheels
2 X 8.5 X 19" 5X114 ET38 ALLOY WHEELS (FRONT)
2 X 9.5 X 19" 5X114 ET35 ALLOY WHEELS (REAR)
a bit of rolling is no problem , pulling is
i want to go for the box like look , no stretch or balloon like shape
like this but then in 19 inch
what sizes do you advice for these wheels ?
245/40/19 front and 275/30/19 in the back , or 265/35/19 ...so many choices to make
much has been written about wheels and tires and i had many help with the PM's some of you send me
but i would like a final advice about the choice of tires
Falken are widely available in Europe but not as common so i don't have reviews on those , but its all about the side walls of the tires
i'm thinking Falken (what type? ) toyo proxes t1 or michelin pilot sport
for these wheels
2 X 8.5 X 19" 5X114 ET38 ALLOY WHEELS (FRONT)
2 X 9.5 X 19" 5X114 ET35 ALLOY WHEELS (REAR)
a bit of rolling is no problem , pulling is
i want to go for the box like look , no stretch or balloon like shape
like this but then in 19 inch
what sizes do you advice for these wheels ?
245/40/19 front and 275/30/19 in the back , or 265/35/19 ...so many choices to make
#5488
depends on the diameter. 255/40/R18 is the stock IS350 rear wheel tire and I think that's tall, so a 45 series is 5% taller. I'm running 255/35/R18 in the rear and that's plenty tall enough for me.
#5489
hello
much has been written about wheels and tires and i had many help with the PM's some of you send me
but i would like a final advice about the choice of tires
Falken are widely available in Europe but not as common so i don't have reviews on those , but its all about the side walls of the tires
i'm thinking Falken (what type? ) toyo proxes t1 or michelin pilot sport
for these wheels
2 X 8.5 X 19" 5X114 ET38 ALLOY WHEELS (FRONT)
2 X 9.5 X 19" 5X114 ET35 ALLOY WHEELS (REAR)
a bit of rolling is no problem , pulling is
i want to go for the box like look , no stretch or balloon like shape
like this but then in 19 inch
what sizes do you advice for these wheels ?
245/40/19 front and 275/30/19 in the back , or 265/35/19 ...so many choices to make
much has been written about wheels and tires and i had many help with the PM's some of you send me
but i would like a final advice about the choice of tires
Falken are widely available in Europe but not as common so i don't have reviews on those , but its all about the side walls of the tires
i'm thinking Falken (what type? ) toyo proxes t1 or michelin pilot sport
for these wheels
2 X 8.5 X 19" 5X114 ET38 ALLOY WHEELS (FRONT)
2 X 9.5 X 19" 5X114 ET35 ALLOY WHEELS (REAR)
a bit of rolling is no problem , pulling is
i want to go for the box like look , no stretch or balloon like shape
like this but then in 19 inch
what sizes do you advice for these wheels ?
245/40/19 front and 275/30/19 in the back , or 265/35/19 ...so many choices to make
#5490
First off welcome to ClubLexus. This setup would clear the fenders at stock suspension. I don't think you'll need to roll any fenders