Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5687
9.5 J x19 ET 33 back
with the rear quarters rolled , front will rub on hard turns lowerd with BC coilovers
245/35/19 front and 275/30/19 in the back Bridgestone potenza
it will give a flush look
#5689
#5690
Did u run the 275s up front
Jadu: ya thats what I was thinking too, wanted to make sure before i pull the trigger, the rims im getting are wrapped with 275 in front and 315 in the back. lol, need to calculate tire cost.
LatitudeNZ, yr front looks great, thanks for the pics, gave me some ideas in the back.
LatitudeNZ, yr front looks great, thanks for the pics, gave me some ideas in the back.
#5691
#5693
looking for 19 inch rims with a 225/35r19 fit tire. what offset should i get, i want to be the same all around so i can rotate my tires still. i dont mind pulling the fenders a little bit. i really dont feel like reading 381 pages just to find my answer. please halp.
#5694
19x10.5 frt 19x11.5r
Hey I'm new to the Forum. Have a 99 SC 300. Looking at getting wheels built. Want to go 19x10.5 frt 19x11.5 rear. Gonna do LS400 BBK. Want to have a deep lip. Maybe run 235 frt 265r. Not gonna slam the car. What would be an et that will work? Don't mind small pull and roll. Thank you in advance I've looked for two months
#5695
I have 18x9.5"+12 - 235/40 up front and would like to install the 25mm Vertex Aero Front Fenders. Are my wheels going to be sunken by a lot? I'm currently pretty flush with a roll and rubber mallet pull.
#5696
Hey I'm new to the Forum. Have a 99 SC 300. Looking at getting wheels built. Want to go 19x10.5 frt 19x11.5 rear. Gonna do LS400 BBK. Want to have a deep lip. Maybe run 235 frt 265r. Not gonna slam the car. What would be an et that will work? Don't mind small pull and roll. Thank you in advance I've looked for two months
I'm guessing it'll be sunken in by about 20mm or 25/32" with your current setup. You could compensate for this by running a larger tire in the front or a spacer.
#5697
I hate spacers, it's the reason why I got low offset wheels in the first place. What if I ran a 18x10.5" +22? My fronts have some curb'age and clearcoat issues anyways, so I wouldn't mind ditching them. I guess I'd need to think about what tire size would work best though. I have 18"x10.5" +15 in the rear right now with a 265/35.
#5698
I hate spacers, it's the reason why I got low offset wheels in the first place. What if I ran a 18x10.5" +22? My fronts have some curb'age and clearcoat issues anyways, so I wouldn't mind ditching them. I guess I'd need to think about what tire size would work best though. I have 18"x10.5" +15 in the rear right now with a 265/35.
#5699
19x10 frt. 19x11.5 rear.
OK guys and gals. I'm new to the Lexus community. And thank you all for all the help. I'm gonna have a set of wheels made. Been trying to get the specs down for months. I want deep step lips. Gonna do LS 4 BBK. Front 19x10 hi disk. Rear 11.5. Not gonna slam the car. Wanted to know good et . Gonna stretch tires. Please please can some wheel fitment experts help me out
And can someone post some pics
And can someone post some pics
#5700
A 18x10.5 +22 would only stick out 3 mm more than your current wheels, so still sunken. It looks like you have varrstoen ES1 wheels, so if I were you I would test fit the rear wheels in the front with vertex fenders. If it looks good, then I would get 18x10.5 +15 with 265/35/18 tires all around, so I could rotate. The wheels will still be a little sunken in, but it should still look good as long as your car isn't completely slammed.