Dx3

iTrader: (13)

Guys,

Does anyone have the part numbers for all of the 97+ body upgrades?? Confused as to certain parts I need/ don't need. Thanks,

Jonny

ACleanSC4

iTrader: (7)

From intellexual.net...

You can probably do without the front bumper foam and wing...everything else you need...

97-00 FULL BODY UPDATE LIST
Description Part Number List Price
front bumper cover 52119-24914 315.64
front grill insert 53114-24020 104.33
front absorber 52611-24030 48.57
front-left foglight 81220-24040 143.07
front-right foglight 81210-24040 143.07
left body rocker panel 75851-24900 236.37
right body rocker panel 75852-24900 236.37
rocker panel clips 75868-24020 1.82
rear bumper cover 52159-24905 324.82
rear-left quarter panel 76973-24902 88.72
rear-right quarter panel 76974-24902 88.72
rear-left retainer 52587-24010 13.45
rear-right retainer 52586-24010 13.45
left tail light 81560-24070 204.20
right tail light 81550-24070 204.20
rear spoiler 76871-24904 433.88

TheMole

iTrader: (13)

The lower door moldings are not listed, but are optional if you want to 'complete' the look.

Dx3

iTrader: (13)

For anyone searching this in the future, they are

75735-24030-c0 - Door Molding Right - Black
75736-24030 -c0 - Door Molding Left - Black

Apparently these are the only parts that come pre-painted so you would need to change the (c0 = black) for whatever color you have.

ACleanSC4 - thanks for that man - I forgot it was on Intellexual.

Jonny

benxd

iTrader: (7)

Jeez for that price you might as well have started with a 97+

Dx3

iTrader: (13)

This is wrong. It is actually

52588-24020



Jonny

Dx3

iTrader: (13)

Yeah, by the time it is all said and done it can get pretty pricey

But that's the price we pay for having this addictive hobby

Jonny

scENFORCER

Jeeze, I was defiantly gonna do this conversion. But I was always under the impression it was well under $1000 for the whole thing.. I guess I'll be saving for a little while longer than I thought.
Will ANY 97+ font bumper fit? Or do I have to buy this special bumper (52119-24914) in order for it to fit on a pre-97 car..

- Sammy

Dx3

iTrader: (13)

Yeah, you can use any 97 bumper... And yes, it is pretty damn expensive. Easier to piece it together than to buy new like I did

Jonny

TheMole

iTrader: (13)

Its cool man I did the same minus the rear bumper and lower door moldings. Even though it cost more for the conversion, it was pretty satisfying when it was completed.

MDeezy

wow... just when I was thinking about this conversion now I see this post.

If one were to just swap the front end it wouldnt be too pricey. The rears arent bad on 96 and under. Maybe swap the tails out...

Blizzy

iTrader: (-1)

I hit Bambi in February, and when I needed a new Bumper Cover, Carson Toyota stepped up and got me one for a good price so that my insurance deductible could go to good use.

The front bumper alone probably has the most dramatic effect of all the 97 pieces on the overall look of the vehicle with 97 tails as a close second. I think all my 97+ front pieces, minus the fogs, ran me ~$450 brand new with paint not included.

Personally, I can't see myself putting thousands of dollars into paint and body when the car's paint still shines and the body looks good. I would rather put that money into performance. But, this is simply a result of my own preferences in conjuctions with the limited resources at my disposal to where I can't do absolutely everything I would want to do with the car.

That being said, the 97+ body does look damn good.

240sxer

looks like the only thing i am missing is the front absorber.


i gotta order that so i can slap my crap on.

joe diego

iTrader: (3)

All I want is the front bumper, no fogs or grill. Would I be able to slap the 97+ front bumper on the post 97 body?

TheMole

iTrader: (13)

Yes you can. You will also need the 97+ absorber or just modify your old one.