RedPhoenix

iTrader: (10)

Its not, I wish. haha. I dont know whose it is, I have had these pics book marked for awhile.

WDoherty

so if 10.5 rear 35mm vs. 9.5 45mm is suggested, what tire is suggested for that rim, is the rim not too wide and will rub?

habitat

Love the car! Reminds me of a ADVAN TCII. Not too hot about the etched AXIS on them...

posterboi

Looks absolutely great

RedPhoenix

iTrader: (10)

Well if a 10.5 +22 can fit a 275 with a little camber and a roll than I see a 275 fitting on those offsets really easy, probably with out any camber at all.

sc400nube

iTrader: (1)

Anyone out there done a 20x10 with a +25mm offset in the rear? Looking to use some Sevas wheels but the 20x10 only comes in a +25mm offset. BTW I also want to lower it .9 inthe rear and 1.2 in the front. front wheel size will be 20x8.5 +25mm offset. Im buying a fender roller but I want to know how much rolling or cutting will need to be done.I really don't want to cut the car.

bigmalik00

It depends on the drop. I am running 20x10 +37 I wish I would it was a 34 or35. I think my drop is about 1.5" in the rear. It can be done. You are getting a kit? you will probably have to cut and roll. IMO I can PM you a pic of my car..

I like Axis and EXE because of the lips. I think they look sweet for the money..

JesLet

iTrader: (19)

Sorry to jack the thread, I just want to confirm and want to know your input about my set up.

19 x 9.5 (40 offset) with 275/30 + 25mm adapters for the rear. --- I think this will work with rear fender rolling right?
Should I get 255/35 stretched?

This is an example of 19 x 9.5 ( 40 offset ) with 275/30 with 20mm adapters.

celiman05

iTrader: (1)

actually the offset for the 9.5 hiro is +55mm. its higher then the damn stock offset. this is why i hate the way the 9.5 looks. and why i will be going with the 10.5. hehe.

a 275 tire im sure would be good. and will not rub.