Racing Hart Cr's on sc300
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2008
Location: Ca
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Racing Hart Cr's on sc300
Anyone have any pics of an sc w/ RH Cr 19's?
I have a chance to pick up these rims at a good price bit not sure if they would fit good/flush
To me correct offset is the key so if they are going to be a bit off then ill hold out and get somehing else.
the wheels that I have a chance to get..
specs.
19x8.5 in front and 19x10 in the rear
The front tire size is 245/35/19 OFFSET 38mm and the rear is 285/30/19 OFFSET 43mm
I have a chance to pick up these rims at a good price bit not sure if they would fit good/flush
To me correct offset is the key so if they are going to be a bit off then ill hold out and get somehing else.
the wheels that I have a chance to get..
specs.
19x8.5 in front and 19x10 in the rear
The front tire size is 245/35/19 OFFSET 38mm and the rear is 285/30/19 OFFSET 43mm
#7
Lexus Test Driver
Oh My Gawd Nice spoke design, gets slightly thinner and sharper, like a star. Man, I've been out of the scene too long...I've never seen this Racing Hart design/model until now. And now that I have, I really like it.
Last edited by SClean4; 02-29-08 at 12:53 AM.
Trending Topics
#9
Pole Position
iTrader: (2)
I had considered these wheels. Im running almost the same offsets with the rear being a +48 (19x10inch wheel) on a different set off wheels. Im on a 285 rear and I'm lowered to a point where about 1" of tire is hidden.Same as my fronts where im +32(5mm included spacer for caliper)Just an idea GL
Thread
Thread Starter
Forum
Replies
Last Post
mdgrwl
IS - 2nd Gen (2006-2013)
11
04-14-09 09:41 AM
OakTwnPnoy
Wheels, Tires & Brakes Forum
6
12-29-04 12:37 AM