pic request of aggressive 18" wheel fitments n sc300
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
pic request of aggressive 18" wheel fitments n sc300
Hi all,
I just wanted to see what some of you have as far as 18" wheel fitments with aggressive offsets. (not +25 or higher) I've gone through the wheel fitment thread, and searched, but cannot seem to find 18x9.5 wheels with +10 to +18 offset or around that neighborhood except for that blue sc with VS-KX i believe.
I'm installing a set of coilovers again, and will be getting a set of 18's, but i haven't come to a decision yet. I kinda got it narrowed down to the Work CR Kai, 18x9.5 +12 all around, XD9 18" staggered, or ROTA P45R 18x9.5 +20 all around(they dont have the +12 available)
I had a set of MB Weapons in 18x9 +15 lowered on Stance coilovers, but the flat face of the wheels didn't look very aggressive.
Any help would be much appreciated. Thanks!
JT
I just wanted to see what some of you have as far as 18" wheel fitments with aggressive offsets. (not +25 or higher) I've gone through the wheel fitment thread, and searched, but cannot seem to find 18x9.5 wheels with +10 to +18 offset or around that neighborhood except for that blue sc with VS-KX i believe.
I'm installing a set of coilovers again, and will be getting a set of 18's, but i haven't come to a decision yet. I kinda got it narrowed down to the Work CR Kai, 18x9.5 +12 all around, XD9 18" staggered, or ROTA P45R 18x9.5 +20 all around(they dont have the +12 available)
I had a set of MB Weapons in 18x9 +15 lowered on Stance coilovers, but the flat face of the wheels didn't look very aggressive.
Any help would be much appreciated. Thanks!
JT
#5
Lexus Champion
iTrader: (16)
I'm actually at work right now, I'll post pics again of my aggressive wheel fitment. I actually have 18x9.5 (+25) in the rear and an 18x8.5 (+24) rim size in the front, And let me tell you, the wheels sit perfectly flush with the fenders, especially if it's lowered too.
#7
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I've gone through the whole wheel fitment thread, but thing is, a ton of the wheels on there have way too positive offsets(around 35 and above, which are not really what I'm looking for. The second post with a link to the BBS wheels does help, but I think I'm leaning towards something closer to +12 i guess.
Trending Topics
#8
Pole Position
iTrader: (1)
Join Date: Feb 2008
Location: OH
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
The first 2 sets of pics were S14's, but I'll assume you meant the burgundy one, as the red one is a little harder to tell.
That said, you're going to want a 9" or 9.5" wide front with an offset in the low teens, 12 or 15. As for the rears you should probably look for something in a 10' or 10.5" with an offset in the 20's.
Be prepared to roll AND pull, plus you'll need to run camber.
That said, you're going to want a 9" or 9.5" wide front with an offset in the low teens, 12 or 15. As for the rears you should probably look for something in a 10' or 10.5" with an offset in the 20's.
Be prepared to roll AND pull, plus you'll need to run camber.
#12
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies...
I've decided on a set of CR Kai's in 18x9.5 +12 all around. I'm not going to be able to put the wheels on til I get my coilovers on the 15th.
I'll post some pics once I get everything in.
Regards,
JT
I've decided on a set of CR Kai's in 18x9.5 +12 all around. I'm not going to be able to put the wheels on til I get my coilovers on the 15th.
I'll post some pics once I get everything in.
Regards,
JT
#14
Lexus Champion
iTrader: (17)
Join Date: Apr 2005
Location: Canoga 818 Park
Posts: 2,471
Likes: 0
Received 0 Likes
on
0 Posts
Waiting on the coilovers, they are on route and will be here mid next week... but that is my offset (0 for the rear).... on 18x9.5........ So I will lower it, and add some camber to make these bad boys tuck the stock fenders....
The fronts have spacers right now.... And this is just a test fit pic...
The fronts have spacers right now.... And this is just a test fit pic...
#15
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts