Ratatat

mine is not working. where is the ecu located for that function? and what do one of these normally cost if i need one?

Gspec

I'm curious about this also......either mines the same way, or i'm not "doing it" right..lol

Amini9

same.. i'll be waiting for an answer too

Ratatat

found this maybe this will help someone

http://us.lexusownersclub.com/forums...y+drivers+seat

Gspec

^it might....I thought I had tried that technique but I didn't know to listen for a beep....gonna try again tmw. thanks.

5sp_jzz30

iTrader: (2)

you have to program the memory option in "park" if your car is auto. you have to do it in neutral with the e-brake up if you are manual transmission.

do not press your brakes while doing it.

1JZPWRD

iTrader: (59)

I believe the car has to be off and in the Park position. Then press either one or two, depends on which one wants to be used.. Make your necceassary adjustments on the seats. Press either one or two, and the memory button at the same time. It will beep will recognized.
Let me know if it works.

Does the 1992 have illuminated entry when used by the either key in the door or remote on the key? Anyone know?

Ratatat

illuminated entry, as in light on door comes on when opened, and footwell light turns on also, when door opened, if that is what you mean, mine does.

Ratatat

does this have anything to do with my drivers seat not going back to the drive position after i move it up after retrieving something from the back, the passenger seat works , but the drivers seat does not.

Amini9

mine doesnt move back either. the passenger side doesthough.

Gspec

mine works! woot! waiting for the beep pays off...thanks for the link.

5sp_jzz30

iTrader: (2)

the driver seat does not go back to its original position if you move it up. that only works on the passenger seat.