View Poll Results: What do you think of the city light?
Like it lots better than the stock (DO IT!)
49
84.48%
Keep the stock city light (It kinda turns me on)
5
8.62%
I have a third option I have listed below
4
6.90%
Voters: 58. You may not vote on this poll
Prototype city light projector upgrade
05-07-09, 07:59 PM
#1
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Prototype city light projector upgrade
Well, on the side of my build I am trying to work in a head light upgrade. Anyway, going with Clear Supermade lenses and of course I am upgrading to Xenon projectors. So what to do with that ugly little ***** looking city light.
Please excuse the ugly light with glue all over it, its just a junker for mock up. Anyway I wanted to see what you guys thought before these are done. Here is what I came up with. I hope they will compliment my new projectors.
First I had to cut down the factory Light holders.
Next I got some White LEDS
New modifided projector type lens
Finally some install pics
Please excuse the ugly light with glue all over it, its just a junker for mock up. Anyway I wanted to see what you guys thought before these are done. Here is what I came up with. I hope they will compliment my new projectors.
First I had to cut down the factory Light holders.
Next I got some White LEDS
New modifided projector type lens
Finally some install pics
05-07-09, 08:16 PM
#2
Lead Lap
iTrader: (8)
Join Date: Sep 2008
Location: VIRGINIA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
nice
very nice, very creative, sell me a set. naww i dont feel like taking my lights apart again. but you did give me an idea with cutting down the light socket thing. i have some nice leds that wont fit because of the ***** tube and in my debate on takin it out when my lights were out i decided not to and my leds wont fit. but no i know i can shorten the socket light holder. thanks and is there any thing i should know before tackle'n my sockets so i wont destroy them? again nice
05-07-09, 08:23 PM
#3
Lead Lap
Join Date: Sep 2007
Location: 501
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
I'm not gonna vote because i'm undecided but I like the idea. IMO it would look better if you could taper it down similar to the opening for the headlight projector.
I already have the white LED's in my city lights. looks good w/ 6k HID's.
I already have the white LED's in my city lights. looks good w/ 6k HID's.
05-07-09, 08:24 PM
#6
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
very nice, very creative, sell me a set. naww i dont feel like taking my lights apart again. but you did give me an idea with cutting down the light socket thing. i have some nice leds that wont fit because of the ***** tube and in my debate on takin it out when my lights were out i decided not to and my leds wont fit. but no i know i can shorten the socket light holder. thanks and is there any thing i should know before tackle'n my sockets so i wont destroy them? again nice
how did you make the mini projector and ring think looks very nice
