mr2tosc4

iTrader: (1)

I needed to raise it up a bit because I added a 25mm spacer, since my fronts were not rolled it rubbed at that baller height

5zigen Border GT (discontinued) now known as Mega Fireball...

maybe if I get bored again...

your new sc gotta be on its way, we need to do the battery workout again

Believe me, I hated it first time I put it on...now it kinda grew on me and I barely notice it at all...

Do it, now the best bang for the buck since I think I only have 24 leds in my cluster too

Elbow grease...tons of it..
I started out with 80 grit..then 150, 200, 400, 800, 1000, and finally 2000.

Used a dremel..flap wheels work.

Nothing wrong with cheap tires if you're eating thru them at a rate of one set per 2 years...All that negative camber I used to run in the rears won't choose which tire to chew.

Nah, I wouldn't want to do it again! I spent watching the entire NBA finals with a dremel in my hand.

It is. Still fly after 16 years.

Thank you sir, but yes, the calipers are my only mods to show after half a year. It's been slow money wise as the RX is not paid yet and trying to get my head back up from the water...

iBMX

The color and exhaust and wheel combo is yea...

IndecentSC

iTrader: (3)

WOW your car looks SICK..

fliptrix

iTrader: (5)

Love it! Awesome color!! One of my fav's also! Just roll those front fenders and drop it soon!

stephenz

real clean!keep em coming

aka paco

iTrader: (15)

calipers look great man, and so does the car as usual

Dinnertime

I hate to derail the thread from the OP; but stephenz refund my money. You have been dodging me on Supraforums for a month, wont respond to my emails and wont call me. You have been online on Supraforums and have read all the messages I have sent you. Quit dodging me and get in contact with me.

slappy96

Best burgandy paint job ever. What is the clearance from caliper to wheel?

MainSource

Sweet! I love the new brakes! The SC4 is looking better than ever man. The polish job is amazing, but I don't think I'd ever do it, so props to you!

Chris

JDMmuscle

iTrader: (9)

if you dont mind me asking, How did you polish them? what was your procedure

ConSynX

iTrader: (1)

paint looks mad good!
hawt car.

howat

can't wait to see it in person. the pics are amazing. wow!

mr2tosc4

iTrader: (1)

paint code is 3R7 from the LS460.

Give him back his money dude! LOL

It's about half an inch now. The 25mm spacer was too much, I could've gone with just a 15mm but the wheels would still be sunk and we all know sunk wheels = fail!

I gotta see your steal of a deal car again mang!

1. use 80grit flapwheel
2. use 100grit flapwheel
3. use 150 wetsand
4. use 200 wetsand
5. use 400 wetsand
6. use 800 wetsand
7. use 1000 wetsand
8. use 2000 wetsand
9. polish with dremel polish compound #421, with felt wheel.
10. repeat #9 until you can see your face in the reflection.

Ey howie, do not sell your car boy, it is clean!

yelloa3gti

is that the old lorton prison? if so i grew up about a mile from there

yelloa3gti

PS... I have had LS calipers and brand new rotors and pads to put on my car for about 2 years... just been to lazy to put em on.. wanna help? haha