Argh! Plastic cable keeps coming off when installing antenna!
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2009
Location: CA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Argh! Plastic cable keeps coming off when installing antenna!
I've tried to install a new antenna mast but the plastic cable inside keeps coming off as the antenna motor brings it in. I've tried to install two new antenna masts and the entire cable came right out both times.
I let someone turn off the radio as I guided the cable to the antenna motor until it took hold. Once it took hold, it took the whole cable out from the antenna.
Am I doing something wrong? Is my antenna motor too strong? Or were both masts defective or just cheaply made?
Thanks,
Ken
I let someone turn off the radio as I guided the cable to the antenna motor until it took hold. Once it took hold, it took the whole cable out from the antenna.
Am I doing something wrong? Is my antenna motor too strong? Or were both masts defective or just cheaply made?
Thanks,
Ken
Thread
Thread Starter
Forum
Replies
Last Post
1995LS400
LS - 1st and 2nd Gen (1990-2000)
1
12-04-07 06:43 AM