sc-fsport

iTrader: (1)

i have ton more pics to post but here is what the finished product will look like!

TommySC300

iTrader: (1)

are you have any under or back pix?

Sup3rD

awesome, I've been wanting to see someone retro the fx-r into the sc headlights. keep us posted with lots of pics with lots of details please!

sc-fsport

iTrader: (1)

what i have may be kinda questionable but trust me it works pretty well!
Yes i had to cut some material out near the leveler window! but it took me a while to just get it mounted a decent way i have a winner. Due to trail in error i pretty much gutted my right side headlight so i am looking for a set on ebay oem donors. Only way i would have known how to get what i got was trail and era so hopefully someone saw what i did wrong and just do what i did right! Hope this is helpful!

sc-fsport

iTrader: (1)

more detail of where i added adhesive and the bi xenon actuator!

sc-fsport

iTrader: (1)

here are some output pix and a better view of the mock up and how i had to mount them.

sc-fsport

iTrader: (1)

clean up the lens with some blue magic and i took the bezel from from the oem projector which was 3"since the fx is 2.5" need a good way to make up for the clearance it worked out pretty well and i rtv it to the inner housing of the light and a front on image of the clear projector

sc-fsport

iTrader: (1)

here is a shot of the output against a wall the glare kept arcing the cut off line idk why? But mind you this is only from one headlamp and the output is that bright so wait til i get them both done! i will take the pix with a better camera next time!

ashtray

iTrader: (12)

how long did this take?

sc-fsport

iTrader: (1)

honestly i could have done it in a day but since i had to see what worked and what didnt work i could do it now in an hour!

TommySC300

iTrader: (1)

how hard is to mount them?

sc-fsport

iTrader: (1)

it was actually easier than i made it i just would say if you are thinking of the retrofit proceed with caution! I couldnt mount them with the mounting points or tabs i had to remove material from the inner working of the housing and the worked it into the perfect position but i really couldnt use bolts or screws but its wedged all the way back in the desired position then i use some adhesive to hold it in place. im debating whether i should put some screws in for extra support but it seemed to line up pretty nice!

Sup3rD

It doesn't look like you would be able to adjust the projectors up and side or left to right like this. Am I correct or wrong?

sc-fsport

iTrader: (1)

from the way it appears no i wont be able to adjust them unless i trim the projector more (dont want to do that) but i have the bi xenon so that my fail proof plan. i just have to make sure its done rite the first time

Sup3rD

I see, so it's going to be a hit or miss if the cut off are both leveled?