Help! install a passenger window
10-05-09, 03:01 PM
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Help! install a passenger window
soo over the weekend had some jealous *** person break into my sc300. fortunetly all they took was my back pack and not $1000 worth of tuning electronics that were out in the open. now i got a new window and took off door panel and cleaned up the million pieces of broken glass however i cannot figure out how 2 get this damn thing in...anybody with any pointers or tips would be greatly appreciated. thanks
10-05-09, 03:30 PM
#4
well, you remove the window tracks so that you can get the new glass in.
Without doing so, You'll AT LEAST need to partially remove the tracks, but it is way easier to just get them out and redo.
Only real problem is one track bolt which IIRC is behind the door lock actuator.
Without doing so, You'll AT LEAST need to partially remove the tracks, but it is way easier to just get them out and redo.
Only real problem is one track bolt which IIRC is behind the door lock actuator.
10-05-09, 08:31 PM
#5
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
well, you remove the window tracks so that you can get the new glass in.
Without doing so, You'll AT LEAST need to partially remove the tracks, but it is way easier to just get them out and redo.
Only real problem is one track bolt which IIRC is behind the door lock actuator.
Without doing so, You'll AT LEAST need to partially remove the tracks, but it is way easier to just get them out and redo.
Only real problem is one track bolt which IIRC is behind the door lock actuator.
Thread
Thread Starter
Forum
Replies
Last Post
