Clear headlight lens feeler thread - GB coming soon
10-13-09, 06:30 PM
#1
Former Sponsor
Thread Starter
iTrader: (6)
Join Date: Jun 2009
Location: NY
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Clear headlight lens feeler thread - GB coming soon
So, in the Vendor section I told everyone that I would be coming out with some really good products. It took a little while, but now I am head to introduce the clear lenses for the SC300/400's. This will be great for those looking for an updated, clean look, or those doing HID retrofits. Personally, I never know how sick these lights looked under the non-clear lenses.
This is only going to be an interest thread, once there is enough interest, we can get the GB going in the F/S section. Post all questions in this thread, no need for PMs as this thread is to be informational for all as well.
Pic of the lense
Sign your name below, rest assured that pricing on this will be very reasonable (less than 200 for those who get in on the GB). I am listing those interested, nothing concrete here. Don't worry, you haven't sold yourselves, yet.
1. OneJay
2. masagsxr
3. fliptrix
4.
5. turbodremz
6. Kira X
7. rpx13
8. tcrow31
9. MCG33
10. NoLongerA13bFan
11. JDMmuscle
12. imarshall
13. TroySC300
14. Slade
15. Dohno
16. vinh
17. ZSC3
18. rvaquino
19. 1jztts
20. VIP_LEX
21. Cleanshots
22. TommySC300
23. BLK13X
24. randyb
25. matttai
26. Jeembo
27. huddleston
28. lexgsj01
29. hapaj
30. Dirty SC
31. pmpdaddyt
32. TommySC300
33. WilsonC88
34. 94LEXUS400
35. ashtray
36. poser714
37. HYPHYSC3
38. UpperCase
39. SC400TT
40. SCVIP300
41. 89MA70
42. cherplex
43. Prowler217
44. mjclements
45. monsterfac
46. MrYoshi
47. indypwr
48. shaitaan
49. Ryan1J
50. Star08
51. lexsc4oo
52. TecnoSmurf
53. boosted4.6
54. menty
55. Chawk60
56. BSC300TT
57. PEARL2
58. Blurr
59. NormanSC93
60. jdm93400
61.
62.
63.
Additional pictures:
Lens/headlight test fitted from a side view:
Lenses alone
Below you will see how the OEM clip/return is used to attach the new lenses for a beautiful OEM fit.
Chris @ RidesLow
This is only going to be an interest thread, once there is enough interest, we can get the GB going in the F/S section. Post all questions in this thread, no need for PMs as this thread is to be informational for all as well.
Pic of the lense
Sign your name below, rest assured that pricing on this will be very reasonable (less than 200 for those who get in on the GB). I am listing those interested, nothing concrete here. Don't worry, you haven't sold yourselves, yet.
1. OneJay
2. masagsxr
3. fliptrix
4.
5. turbodremz
6. Kira X
7. rpx13
8. tcrow31
9. MCG33
10. NoLongerA13bFan
11. JDMmuscle
12. imarshall
13. TroySC300
14. Slade
15. Dohno
16. vinh
17. ZSC3
18. rvaquino
19. 1jztts
20. VIP_LEX
21. Cleanshots
22. TommySC300
23. BLK13X
24. randyb
25. matttai
26. Jeembo
27. huddleston
28. lexgsj01
29. hapaj
30. Dirty SC
31. pmpdaddyt
32. TommySC300
33. WilsonC88
34. 94LEXUS400
35. ashtray
36. poser714
37. HYPHYSC3
38. UpperCase
39. SC400TT
40. SCVIP300
41. 89MA70
42. cherplex
43. Prowler217
44. mjclements
45. monsterfac
46. MrYoshi
47. indypwr
48. shaitaan
49. Ryan1J
50. Star08
51. lexsc4oo
52. TecnoSmurf
53. boosted4.6
54. menty
55. Chawk60
56. BSC300TT
57. PEARL2
58. Blurr
59. NormanSC93
60. jdm93400
61.
62.
63.
Additional pictures:
Lens/headlight test fitted from a side view:
Lenses alone
Below you will see how the OEM clip/return is used to attach the new lenses for a beautiful OEM fit.
Chris @ RidesLow
Last edited by Rides Low; 10-29-09 at 09:17 PM.
10-13-09, 06:49 PM
#6
I'm in if they will be perfectly fit. Only reason I say that was because I believe some members bought one of those aftermarket headlights on ebay, take the lense out and put them on their original housing. Its been said that most of those do not fit perfectly and have some issues.
But yeah.. I'm in.
But yeah.. I'm in.
Trending Topics
10-13-09, 07:14 PM
#8
Lexus Test Driver
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Hope this one goes better than the last couple "clear lens" GB's
Few questions
1. Whats the brand?
2. Could you install the light in a car and take some pics? I am interested in the outer edge gap where the light meets the fender. Factory there is a 4mm thick gasket, I have seen some clear lenses that dont fill that gap very well.
3. How good is the fitment on the light itself?
4. Do the edges come pre-painted black or was that done to the lens by the installer? That really helps hide glue on clear lenses.
5. Last, sorry for all the questions, how many sets do you have to get to make this happen?
Few questions
1. Whats the brand?
2. Could you install the light in a car and take some pics? I am interested in the outer edge gap where the light meets the fender. Factory there is a 4mm thick gasket, I have seen some clear lenses that dont fill that gap very well.
3. How good is the fitment on the light itself?
4. Do the edges come pre-painted black or was that done to the lens by the installer? That really helps hide glue on clear lenses.
5. Last, sorry for all the questions, how many sets do you have to get to make this happen?
10-13-09, 07:38 PM
#12
Hope this one goes better than the last couple "clear lens" GB's
Few questions
1. Whats the brand?
2. Could you install the light in a car and take some pics? I am interested in the outer edge gap where the light meets the fender. Factory there is a 4mm thick gasket, I have seen some clear lenses that dont fill that gap very well.
3. How good is the fitment on the light itself?
4. Do the edges come pre-painted black or was that done to the lens by the installer? That really helps hide glue on clear lenses.
5. Last, sorry for all the questions, how many sets do you have to get to make this happen?
Few questions
1. Whats the brand?
2. Could you install the light in a car and take some pics? I am interested in the outer edge gap where the light meets the fender. Factory there is a 4mm thick gasket, I have seen some clear lenses that dont fill that gap very well.
3. How good is the fitment on the light itself?
4. Do the edges come pre-painted black or was that done to the lens by the installer? That really helps hide glue on clear lenses.
5. Last, sorry for all the questions, how many sets do you have to get to make this happen?
2. this lens was made and owner of the headlight requested for the lens not to be reattached.
3. like OEM, will get better pics when the lens are sent back.
4. yes i do believe that this will come painted black.
5. looking for at least 10 people...more would be fantastic.
10-13-09, 07:49 PM
#14
Former Sponsor
Thread Starter
iTrader: (6)
Join Date: Jun 2009
Location: NY
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
LiCelsior has been working behind the scenes with me on this. His answers are legit.
These lenses will fit just like OEM. OEM lenses were used and the OEM lens returns are used for the installation.
I will be able to post up additional pictures later on tonight or tomorrow.
Chris @ Rides Low
These lenses will fit just like OEM. OEM lenses were used and the OEM lens returns are used for the installation.
I will be able to post up additional pictures later on tonight or tomorrow.
Chris @ Rides Low
