new guy on the block
11-15-09, 03:45 PM
#21
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
thanks everyone!
about the exhaust, i still havnt decided. i need to see comparison pictures, which ill research a bit.
as for gauges though i decided that im going to cut the center 2 air ducts, and put 4 gauges in there, and cover it with a tinted piece of glass so you cant see them unless the car is on.
about the exhaust, i still havnt decided. i need to see comparison pictures, which ill research a bit.
as for gauges though i decided that im going to cut the center 2 air ducts, and put 4 gauges in there, and cover it with a tinted piece of glass so you cant see them unless the car is on.
11-16-09, 10:58 AM
#22
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
when i got it, extremely dirty. had been sitting under a tree for a few months >.<
After a 3 hour long hand wash and wax
1992 sc300
1jzgte
stance coilovers
new paint
bbs jump-offs
After a 3 hour long hand wash and wax
1992 sc300
1jzgte
stance coilovers
new paint
bbs jump-offs
11-16-09, 11:08 AM
#23
thanks everyone!
about the exhaust, i still havnt decided. i need to see comparison pictures, which ill research a bit.
as for gauges though i decided that im going to cut the center 2 air ducts, and put 4 gauges in there, and cover it with a tinted piece of glass so you cant see them unless the car is on.
about the exhaust, i still havnt decided. i need to see comparison pictures, which ill research a bit.
as for gauges though i decided that im going to cut the center 2 air ducts, and put 4 gauges in there, and cover it with a tinted piece of glass so you cant see them unless the car is on.
https://www.clublexus.com/forums/per...st-thread.html
car is looking good all shined up....
Last edited by 96SC4; 11-16-09 at 11:12 AM.
11-16-09, 11:53 AM
#25
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure you'll find something you like in here.....
https://www.clublexus.com/forums/per...st-thread.html
car is looking good all shined up....
https://www.clublexus.com/forums/per...st-thread.html
car is looking good all shined up....
i think im going to go with hks hi power, and im keeping it dual, and angling both mufflers away from each other.
Enjoy the new car, man!
11-16-09, 04:07 PM
#28
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
thanks everyone!!
update:
fixed my heat!!
after looking, and trying to figure out if i had a vacuum line set up for the heat actuator thingy i decided to get a Y barbed plastic pipe, about 4ft of vacuum hose, 3 wire ties, and 4 clamps. i cut one of the vacuums from the intake, put the Y plastic piece in with clamps on it, and ran it to the actuator. since my car was already warm from getting supplies for my mini project i had almost instant heat!
hizzah!
lol
yay for having heat haha
update:
fixed my heat!!
after looking, and trying to figure out if i had a vacuum line set up for the heat actuator thingy i decided to get a Y barbed plastic pipe, about 4ft of vacuum hose, 3 wire ties, and 4 clamps. i cut one of the vacuums from the intake, put the Y plastic piece in with clamps on it, and ran it to the actuator. since my car was already warm from getting supplies for my mini project i had almost instant heat!
hizzah!
lol
yay for having heat haha
11-16-09, 04:23 PM
#29
Driver
Join Date: Apr 2008
Location: Washington
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts