SC- 1st Gen (1992-2000)

Quick ? about speedometer

Thread Tools
 
Search this Thread
 
Old 02-18-10, 01:46 PM
  #1  
Royal769sr
Driver School Candidate
Thread Starter
 
Royal769sr's Avatar
 
Join Date: Feb 2010
Location: Nevada
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default Quick ? about speedometer

Hi, im new to posting but have been looking on the forums for supra stuff for about 10 years now.. just never felt like posting untill now. Looked everywhere except under my car lol.. but my speedometer is not working and i was wondering if the speedo gear in the tranny is electronic, or do i have a speedo cable? Oh yeah.. its a 1993 Black with tan 5spd. 2jz
Old 02-18-10, 02:25 PM
  #2  
ishootstuf
Lead Lap
iTrader: (1)
 
ishootstuf's Avatar
 
Join Date: Jun 2006
Location: Florida
Posts: 679
Received 3 Likes on 3 Posts
Default

Originally Posted by Royal769sr
Hi, im new to posting but have been looking on the forums for supra stuff for about 10 years now.. just never felt like posting untill now. Looked everywhere except under my car lol.. but my speedometer is not working and i was wondering if the speedo gear in the tranny is electronic, or do i have a speedo cable? Oh yeah.. its a 1993 Black with tan 5spd. 2jz
Electric. If the odometer is still clicking over, you need a cluster. If not, speed sensor or wiring.
Old 02-18-10, 03:53 PM
  #3  
sc5sdanny
Lead Lap
 
sc5sdanny's Avatar
 
Join Date: May 2009
Location: FL
Posts: 671
Likes: 0
Received 2 Likes on 1 Post
Default

have the same problem your going to need another cluster or a motor from another cluster to replace yours
Old 02-18-10, 05:42 PM
  #4  
SH_JZZ30
Lexus Champion
iTrader: (1)
 
SH_JZZ30's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 2,407
Likes: 0
Received 2 Likes on 2 Posts
Default

On my 97, the speedo used to work only when it's cool. If it got too hot, it would cut off and the odometer would stop working also. This causes the steering to feel very loose because it is speed sensitive which is pretty dangerous. I even got a code that says the speedo malfunction.

I bought another cluster and it worked perfectly.
Old 02-19-10, 12:48 PM
  #5  
Royal769sr
Driver School Candidate
Thread Starter
 
Royal769sr's Avatar
 
Join Date: Feb 2010
Location: Nevada
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks guys. i get my new cluster today. figured since all my lights were out too then i might as well.. we will see if the cluster change fixes it. Good point ISHOOTSTUF! didnt think about that.
Old 02-19-10, 01:59 PM
  #6  
Vortes
Lead Lap
 
Vortes's Avatar
 
Join Date: Nov 2007
Location: Florida
Posts: 491
Likes: 0
Received 0 Likes on 0 Posts
Default

My speedo doesnt work sometimes, but i just smack the dash and it brings it to life. Haven't had to do it for a few months though, pretty happy with it.
Old 02-22-10, 02:18 PM
  #7  
Royal769sr
Driver School Candidate
Thread Starter
 
Royal769sr's Avatar
 
Join Date: Feb 2010
Location: Nevada
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

update.... got my cluster. Pissed off that its not the same on the back at all. so i tried to take out the needles and swap them, but sure enough the damn needles dont fit either!! how the heck do i take out the speedo motor and is that not going to be compatiable either?
Old 02-22-10, 03:47 PM
  #8  
sc5sdanny
Lead Lap
 
sc5sdanny's Avatar
 
Join Date: May 2009
Location: FL
Posts: 671
Likes: 0
Received 2 Likes on 1 Post
Default

take the clusrter appart the motors will work as for the needles it depends wat year cluster it is. 92-94 have white needles and 95-96 have red.
Old 02-22-10, 04:06 PM
  #9  
Royal769sr
Driver School Candidate
Thread Starter
 
Royal769sr's Avatar
 
Join Date: Feb 2010
Location: Nevada
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

ok well i decided to take the darn thing apart. took out the motor from the new cluster. went to take out the old one and once again, the motor doesnt bolt in the same way so i didnt even bother taking it out. plust the ODO screen was smaller on the new one. It must be from an OBDII SC400 Auto, and i have a 93 SC300 5spd.. this is driving me crazy. can i buy a motor somewhere? or am i SOL untill i find the correct cluster
Old 02-22-10, 04:37 PM
  #10  
sc5sdanny
Lead Lap
 
sc5sdanny's Avatar
 
Join Date: May 2009
Location: FL
Posts: 671
Likes: 0
Received 2 Likes on 1 Post
Default

im not sure im stuck to the needles from the 95-96 dont light up with the board from the 92-94 and the dealer doesnt sell the cluster in parts u have to pay the 800 bucks for the whole thing.
Old 05-25-12, 10:11 AM
  #11  
Lukas
Driver School Candidate
 
Lukas's Avatar
 
Join Date: May 2012
Location: Rsa
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi! Can anyone maybe tel me on the ls400 vvti does the abs works along with the speedo meter? Becaus every thing on the dash works except the speedo?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jjfleck
ES - 1st to 4th Gen (1990-2006)
6
04-06-19 05:26 PM
Yohan84
SC- 1st Gen (1992-2000)
2
12-29-14 10:36 AM
jeriah77
LS - 1st and 2nd Gen (1990-2000)
3
09-01-10 04:59 PM
Twix
LS - 1st and 2nd Gen (1990-2000)
9
12-15-08 04:18 PM
hershsc400
SC- 1st Gen (1992-2000)
7
07-29-08 08:46 PM



Quick Reply: Quick ? about speedometer



All times are GMT -7. The time now is 04:26 PM.