Sc300max Sc300
#34
Rookie
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: fl
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Im planning on building a setup for the 1/4 mile...
Nitrous
2 Step
To help with spooling.
As far as 3.4 l
lol not gonna happen with my little pennies.
Im not going to make a dyno queen.
I don't understand what I didn't mask off? The condenser in the front and the mufflers lol not that big of a deal... Trust me.. Some spray paint will take care of it.... Planning on doing it on the weekend.
Here are some cars that I built..
My first ever turbo kit all alone lol. In front of the house with a Miller mig welder..
9psi 280 hp 250 tq Safc 2
480cc Injectors
Not 2002 lol
This is the same car but after i think like 3 yrs, the longest I ever kept a car
1jz
sc61 .68
Ebay Manifold
Tial 44mm
Ems Standalone Wire by ME! lol
4 inch downpipe and exhaust
Custom Fuel Rail
650cc RC Injectors
Walbro In tank
Msd Inline
Turbosmart FPR
-6 Return Fuel
-8 Feed Fuel
J30 LSD
Big front mount
3 Inch intercooler piping
Typical Gauges
Lc1 Wideband
Tial 50mm Bov
Competition Clutch Kevlar Disc
Megan Track Coilovers
Etc. Etc. lol
21 PSI Daily Super rich... Dyno where I use to work had the airfuel messed up
458 hp 420 Tq
275 35 18 in the rear were useless..
Car that I built afterwards... don't ask about the sr20 lol
I was in denial haha
s13 Sr20
Ebay Intake mani
Ems Standalone Wire by me
Walbro pump
Rays Gramlights 57 optimise
Godspeed coilovers
Exedy Clutch
Apex Full exhaust down pipe back
Greddy intercooler
Intercooler piping done by me
Hks Bov
Silvia front
Carbon fiber hood
I tuned it myself made 212hp on 7psi
Didn't want to push that little turbo...
I bought a sc61 for it and a Tial 38mvs wastegate
but sold it before I did that.
I bought this mustang after the black car... I loved this car but I sold It so I could buy more cars from the auction (i buy sell cars from the auction) so I kind of needed the money, but totally regret doing it. The whole setup was done by some other guy previous from the guy I got it from, but the engine was bad and had a lot of other problems, from when some dealer tried to put the motor together. Dealer did so many rigs lol, missing bolts on the headers and transmission it was crazy.
2002 Mustang gt
Twin garrets
Twin Tial 38mm
50mm tial bov
A1000 fuel pump
TKO 600 Transmission
650 cc Injectors
Front mount
Complete fuel system with sump on tank
I put on the Cobra bumper my friend painted it for me.... No overspray on the intercooler hahah!
9psi 400hp 450tq
Tranny had a problem, if I rev over 5500 it would let me change to next gear.
I had some et streets on it and did a 7.9 in the 1/8th but shifting like at 5000rpm and slowly
It was fun on the street before I had the cobra bumper it looked like a v6 mustang. A lot of people picked on me. When they hear the wastegate they give you that WTF look lol.
I used to work at a shop, i did the wiring there for a little while.. Wired up there street supra I think its gone 9.1 1/4 now... That was a lot of wiring especially with a factory interior... 15 relays I wired up. Cdi Box full sequential, Nitrous etc etc.... The tuner/ Fabricator Frank has a 9.0 sec 300zx, I learned a lot front this guy.He does some really nice work. I just finished wiring a Mustang with a cobra motor 2 Dis 4 boxes individual coils it came out nice.
I've done a bunch of supra's with the EMS Stinger and the EMS 8860 1j's and 2j's are easy. I did a 7mgte with a stinger, put a microtech standalone on a 1991 300zx twin turbo what a pain in the *** that car is... I had to change the water pump on that car. Wire up a Rat Rod that this crazy white guy made had a v6 firebird motor lol, he thought a welded in dash was a good idea.. it wasn't lol. One car I did was a pain it was a 2008 Corvette zo6, kid made his own turbo kit.. I wired it up at the shop and nothing lol.... I found a converter for the crank and cam sensors from lingenfelter and we finally got it to run.. I did it piggy back style.. Just finished doing a 2008 charger too... Huge supercharger.. 60-1 crank trigger wheel.
lol too much info... I know just trying to get some respect around here
Nitrous
2 Step
To help with spooling.
As far as 3.4 l
lol not gonna happen with my little pennies.
Im not going to make a dyno queen.
I don't understand what I didn't mask off? The condenser in the front and the mufflers lol not that big of a deal... Trust me.. Some spray paint will take care of it.... Planning on doing it on the weekend.
Here are some cars that I built..
My first ever turbo kit all alone lol. In front of the house with a Miller mig welder..
9psi 280 hp 250 tq Safc 2
480cc Injectors
Not 2002 lol
This is the same car but after i think like 3 yrs, the longest I ever kept a car
1jz
sc61 .68
Ebay Manifold
Tial 44mm
Ems Standalone Wire by ME! lol
4 inch downpipe and exhaust
Custom Fuel Rail
650cc RC Injectors
Walbro In tank
Msd Inline
Turbosmart FPR
-6 Return Fuel
-8 Feed Fuel
J30 LSD
Big front mount
3 Inch intercooler piping
Typical Gauges
Lc1 Wideband
Tial 50mm Bov
Competition Clutch Kevlar Disc
Megan Track Coilovers
Etc. Etc. lol
21 PSI Daily Super rich... Dyno where I use to work had the airfuel messed up
458 hp 420 Tq
275 35 18 in the rear were useless..
Car that I built afterwards... don't ask about the sr20 lol
I was in denial haha
s13 Sr20
Ebay Intake mani
Ems Standalone Wire by me
Walbro pump
Rays Gramlights 57 optimise
Godspeed coilovers
Exedy Clutch
Apex Full exhaust down pipe back
Greddy intercooler
Intercooler piping done by me
Hks Bov
Silvia front
Carbon fiber hood
I tuned it myself made 212hp on 7psi
Didn't want to push that little turbo...
I bought a sc61 for it and a Tial 38mvs wastegate
but sold it before I did that.
I bought this mustang after the black car... I loved this car but I sold It so I could buy more cars from the auction (i buy sell cars from the auction) so I kind of needed the money, but totally regret doing it. The whole setup was done by some other guy previous from the guy I got it from, but the engine was bad and had a lot of other problems, from when some dealer tried to put the motor together. Dealer did so many rigs lol, missing bolts on the headers and transmission it was crazy.
2002 Mustang gt
Twin garrets
Twin Tial 38mm
50mm tial bov
A1000 fuel pump
TKO 600 Transmission
650 cc Injectors
Front mount
Complete fuel system with sump on tank
I put on the Cobra bumper my friend painted it for me.... No overspray on the intercooler hahah!
9psi 400hp 450tq
Tranny had a problem, if I rev over 5500 it would let me change to next gear.
I had some et streets on it and did a 7.9 in the 1/8th but shifting like at 5000rpm and slowly
It was fun on the street before I had the cobra bumper it looked like a v6 mustang. A lot of people picked on me. When they hear the wastegate they give you that WTF look lol.
I used to work at a shop, i did the wiring there for a little while.. Wired up there street supra I think its gone 9.1 1/4 now... That was a lot of wiring especially with a factory interior... 15 relays I wired up. Cdi Box full sequential, Nitrous etc etc.... The tuner/ Fabricator Frank has a 9.0 sec 300zx, I learned a lot front this guy.He does some really nice work. I just finished wiring a Mustang with a cobra motor 2 Dis 4 boxes individual coils it came out nice.
I've done a bunch of supra's with the EMS Stinger and the EMS 8860 1j's and 2j's are easy. I did a 7mgte with a stinger, put a microtech standalone on a 1991 300zx twin turbo what a pain in the *** that car is... I had to change the water pump on that car. Wire up a Rat Rod that this crazy white guy made had a v6 firebird motor lol, he thought a welded in dash was a good idea.. it wasn't lol. One car I did was a pain it was a 2008 Corvette zo6, kid made his own turbo kit.. I wired it up at the shop and nothing lol.... I found a converter for the crank and cam sensors from lingenfelter and we finally got it to run.. I did it piggy back style.. Just finished doing a 2008 charger too... Huge supercharger.. 60-1 crank trigger wheel.
lol too much info... I know just trying to get some respect around here
Last edited by sc300max; 04-06-10 at 01:36 AM.
#36
Rookie
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: fl
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
DOES ANYBODY HAVE A REALLY NICE SC400 THAT THEY WANT TO TRADE ME????? PM ME IF YOU DO!
Im looking for a sc400 I want to turbo the V8
Maybe car for car minus coils, rims and seats...... let me know.
Im looking for a sc400 I want to turbo the V8
Maybe car for car minus coils, rims and seats...... let me know.
Thread
Thread Starter
Forum
Replies
Last Post