Converting to R134a with 97 Parts Car
06-28-11, 03:16 AM
#16
I located where the leak was...
Lookevo, then that wont work, the end fittings arent the same where its connected to the compressor, evaporator.
I took the new lines and replaced all the new o rings as well. I could have used the old lines, but my compressor
was seized, so I used my 97 compressor; which in turn made me used new lines, switch, and evaporator.
Lookevo, then that wont work, the end fittings arent the same where its connected to the compressor, evaporator.
I took the new lines and replaced all the new o rings as well. I could have used the old lines, but my compressor
was seized, so I used my 97 compressor; which in turn made me used new lines, switch, and evaporator.
Thread
Thread Starter
Forum
Replies
Last Post
vonfilm
LX - 1st and 2nd Gen (1996-2007)
2
06-17-09 05:43 AM
