Lets Talk 2UZFE V161 Manual Conversions
#17
Pit Crew
Thread Starter
Join Date: May 2003
Location: Ontario
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
On the bellhosing:
I saw that the V160/1 has an integral bellhousing or rather forward gearbox casing. these will be harder to manufacture than say a W or R series bellhousing (hence the availability).
On the flywheel:
I have been talking to the clutch guys QM, Fidanza and JB Racing, and it is a matter of sending the flexplate (for bolt, and ring gear pattern), clutch and pressure plate (to match the provisions), and they will manufacture a lightened flywheel out of aluminum.
If I have overlooked anything, or you gents see a problem with the approach please let me know.
I saw that the V160/1 has an integral bellhousing or rather forward gearbox casing. these will be harder to manufacture than say a W or R series bellhousing (hence the availability).
On the flywheel:
I have been talking to the clutch guys QM, Fidanza and JB Racing, and it is a matter of sending the flexplate (for bolt, and ring gear pattern), clutch and pressure plate (to match the provisions), and they will manufacture a lightened flywheel out of aluminum.
If I have overlooked anything, or you gents see a problem with the approach please let me know.
Last edited by rollexus; 04-12-10 at 06:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post