Sc300 5 spd swap questions
#16
I do all my own work so i dont pay for labor. My w58 swap cost me around $650 with all new parts (minus w58, used of course). Then i decided to go single/fuel/ems so i purchased a Soarer R154 with bellhousing, slave, extended shifter for $900. Tranny is mint with 32k on it and not your regular beat the F&%$ out of MK3 R154 with a billion miles on it, so i didnt mind paying top dollar for it. All i have to do now is just get a r154 front DS and a clutch that can hold 600-700 ft lbs of tq and it ready to be thrown in.
#18
You want me too take some pics of an untouched/undrilled shifter housing and shifter extension installed onto my R154?
Next time, do your home work before you come in here correcting my ***. This why I barely post on here, ........F()ckn know it alls
#19
I do all my own work so i dont pay for labor. My w58 swap cost me around $650 with all new parts (minus w58, used of course). Then i decided to go single/fuel/ems so i purchased a Soarer R154 with bellhousing, slave, extended shifter for $900. Tranny is mint with 32k on it and not your regular beat the F&%$ out of MK3 R154 with a billion miles on it, so i didnt mind paying top dollar for it. All i have to do now is just get a r154 front DS and a clutch that can hold 600-700 ft lbs of tq and it ready to be thrown in.
#20
Excuse me??? Yeah you must be 110% correct cuz you did my 5 speed swap a month ago....right?
You want me too take some pics of an untouched/undrilled shifter housing and shifter extension installed onto my R154?
Next time, do your home work before you come in here correcting my ***. This why I barely post on here, ........F()ckn know it alls
You want me too take some pics of an untouched/undrilled shifter housing and shifter extension installed onto my R154?
Next time, do your home work before you come in here correcting my ***. This why I barely post on here, ........F()ckn know it alls
Last edited by jdmJZA70; 05-01-10 at 01:40 PM.
#21
The hardest thing is drilling ur firewall for the Clutch Master Cylinder. I was upside down on my driver seat with a lethal drill shooting sparks trying to cut a 3 inch hole in my firewall...intense.
#22
Just don't correct me when I'm commenting on things that I have actually seen an done with my own hands.
The offer for the installed, untouch OEM extension housing is still open if you'd like too see it......ma E-thug
Seriously though, back on the topic. Use your PM if you find it necessary.
#24
Not true at all, i havent read all the posts, so im sure this was already posted but heres what i bought and what i needed when i completed my swap
i just got done completing my swap literally 3 days ago. Go to Driftmotion.com they have literally EVERYTHING for the swap..
THings you need: (stock clutch and flywheel will be cheaper)
R154 transmission - $450
1JZ bellhousing - $220
Clutch - $350(NOT STOCK)
Flywheel - $300(not stock)
Slave Cylinder - $50
Master Cylinder - $110 w/hardlines
Hard lines -
BRAKE Clutch Pedal Assembly - $250
1pc Driveshaft - $350(the automatic DS is 3" too short when swapped to Manual)
Driveshaft/Differential Adapter - $160
R154 Shifter Extension - $360
R154 Transmission Output shaft seal - $9
SC300 Manual Shifter assembly w/Boot - $54
TOTAL without installation: $2,663.00
TUNING:
If you dont get the M/T ECU, you can get a standalone tuner, (AEM EMS or piggyback with Greddy emanage or Apexi NEO) - $350
good luck bro anymore questions let me know!!
Last edited by 1JZ300; 05-02-10 at 01:57 AM.
#25
You can do a W58 swap under a grand quite easily. Its usually the big ticket items that add up. I.E. trans, clutch pedal setup, clutch, ds...everything else is easy japaneezy.
The hardest thing is drilling ur firewall for the Clutch Master Cylinder. I was upside down on my driver seat with a lethal drill shooting sparks trying to cut a 3 inch hole in my firewall...intense.
The hardest thing is drilling ur firewall for the Clutch Master Cylinder. I was upside down on my driver seat with a lethal drill shooting sparks trying to cut a 3 inch hole in my firewall...intense.
why were you drilling a 3" hole?
#26
what the hell? r154 cost 400-800 in the US? the cheapest one you can find in aus is 1300AUD. most of them are around 1600. thats ridiculous, i could get one shipped for cheaper than buy it here :s
#27
why did you bump this thread? as i recall someone recently make a thread exactly about this..
https://www.clublexus.com/forums/sc-...-a-thread.html
https://www.clublexus.com/forums/sc-...-a-thread.html
Thread
Thread Starter
Forum
Replies
Last Post
SCjzz
Performance & Maintenance
9
10-31-08 12:35 PM
soarer NAT
Performance & Maintenance
6
10-01-03 02:49 PM