Finally my sc300 overhaul
#1
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Finally my sc300 overhaul
Sup guys,
I have now owned this SC for about 1.5 years and finally taking the leap to the single build. I have also taken the opportunity since it's down to redo the suspension, brakes, new wheels, body work and just about everything I can until I run out of money .
1jz swap was done; only mods were dual magna flow 2.5" up to midpipe, dropped on trd shocks and apexi springs, tt chrome wheels and the rest was stock when purchased.
Changed to 18x8.5 and 18x10 Maya wheels, put on the HKS BOV, Intake, and polished a few turbo pipes(pointless but looked good).
Last chang before my current build was some CE Mesh 19x8.5 front 19x9.5 rears put 20% on all windows and 35% on windshield.
Keep posted for new pics and info on my current overhaul
I have now owned this SC for about 1.5 years and finally taking the leap to the single build. I have also taken the opportunity since it's down to redo the suspension, brakes, new wheels, body work and just about everything I can until I run out of money .
1jz swap was done; only mods were dual magna flow 2.5" up to midpipe, dropped on trd shocks and apexi springs, tt chrome wheels and the rest was stock when purchased.
Changed to 18x8.5 and 18x10 Maya wheels, put on the HKS BOV, Intake, and polished a few turbo pipes(pointless but looked good).
Last chang before my current build was some CE Mesh 19x8.5 front 19x9.5 rears put 20% on all windows and 35% on windshield.
Keep posted for new pics and info on my current overhaul
Last edited by 96sc300; 07-22-10 at 01:07 AM.
#5
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
LOL I hope your car is ready for this
Trending Topics
#10
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to all. Ok here is some of the stuff going in this week
Megan Coil Overs
Pres 67mm ball bearing Turbo with 81.ar
3" V-band DownPipe, Drego Manifold, AEM UGEO
I will post up some more stuff later.
Megan Coil Overs
Pres 67mm ball bearing Turbo with 81.ar
3" V-band DownPipe, Drego Manifold, AEM UGEO
I will post up some more stuff later.